Key features

• •If you need the pump to work in a low water level environment (the water level does not exceed the pump), the float switch need to be locked on the pump
• •The working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automatically
• •Kindly Tip: When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape
• •1/2HP High Power: Prostormer Sump Pump uses 1/2HP power, which is more efficient than ordinary sump pump; Max 2000 Gallon Per Hour great for clean or dirty water from swimming pool covers, basements, pits, ponds, window wells, rain barrels or other flooded areas
• •Multi Outlet Sizes: 3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be
• •Keep Open Mode: When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned