Culligan HF-150A Whole Standard Duty 3/4 Inlet/Outlet Water Filter Housing, Blue
Key features
- •Whole house water filtration system with a 3/4" inlet/outlet connectors
- •Perfect for residential homes, helps protect appliances and pluming from sediment and scale
- •Features built-in pressure relief valve
- •Reduces: sediment, rust, scale, dirt, course sand, sand, fine sand, extra fine sand and silt (depending on filter cartridge)
- •The HF-150A is tested and certified by WQA against NSF/ANSI Standard 42 for materials safety and structural integrity only
- •Extends life of washing machines, hot water heaters, and other water-using household appliances
Culligan HF-150A Whole Standard Duty 3/4 Inlet/Outlet Water Filter Housing, Blue
List Price: $39.97$35.97DEALYou Save: $4.00 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (26)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.0
out of 5
Based on 10 reviews
5★
20%
4★
30%
3★
10%
2★
20%
1★
20%
Unless you love plumbing work, probably should pass
A. Klos✓ Verified Purchase•July 19, 2018
Man what a pain. I've installed house filters before, but I tried two inline for smell and filtration. Got two of these. I have CPVC. Leaked with tape. Retaped. Leaked more. Retaped. Leaked still. Pipe doped. Leaked. More dope. Made mess but finally got them not to leak on the inlet and outlet ports.
Installed the filters and pressure tested, leaked from the housing. It did finally stop but at filter change time I will dope the threads inside where the oring is.
Also doesn't come with a filter wrench.
Installed the filters and pressure tested, leaked from the housing. It did finally stop but at filter change time I will dope the threads inside where the oring is.
Also doesn't come with a filter wrench.
As good as any basic sediment filter.
Ken✓ Verified Purchase•May 13, 2018
Had the HF-360 installed in the house for 12 years and it started leaking out the top. There are about 4 o-rings that eventually rot out and start leaking. I replaced the o-rings I could reach and it reduced the leaking, but didn't eliminate it. Fortunately, this HF-360A is the same size and footprint, which meant it was a straightforward swap I could do without a plumber. My original setup had a soldered threaded connection at the input and a sharkbite 3/4 threaded connection at the output. The Sharkbite worked great and did not leak over the 12 years. I replaced it with a new Sharkbite anyway. Installed the sharkbite into the filter head and used thread tape and wrapped at least 5 times for a leak free connection. Then, I took out the old unit and spun the new head only onto the teflon taped, soldered threaded input pipe. Pushed the shark bite on and slowly turned on the water. No more leaks!
Installation was easy enough. the filter head has 4-bolt holes (not ...
C.R.H.✓ Verified Purchase•April 25, 2018
the filter seems to be made well, Installation was easy enough. the filter head has 4-bolt holes (not threaded) I had to make a filter bracket and utilized the 4-bolt holes provided on top of the filter head. I used 1/4" x 1.25" lag screws, 4-each. the filter bracket I made is 3/8" aluminum plate, its all I had at the time. I added this filter to a new on-demand water heater I installed (the manufacturer recommended a pre-filter)
everything went well, no leaks and seems to be working as it should. I gave this filter 4 stars because it does not come with a filter wrench? not sure why?
everything went well, no leaks and seems to be working as it should. I gave this filter 4 stars because it does not come with a filter wrench? not sure why?
Loose threads, okay design
Robert✓ Verified Purchase•February 3, 2018
(A) ez leaky. Leaked 3 times: first through threads - if doing pvc, you must use pvc-compatible pipe dope, NOT teflon tape (leaked). Second through pressure relief (red button), pvc shred from cutting got wedged between washer and housing. Had to unscrew the stainless screw to fix that. Third: 10 hours after installing, a drip on the threads again. I really think the threads are poorly cut because I tightened it flush with just my hand, no tools or pipe connected.
(B) After that low quality experience, I looked at other brands. They are a similar price, identical size filters, and include the filter spanner.
(C) pressure locks on the filter housing. Once you've closed the valves, you must relieve pressure before it will open.
(B) After that low quality experience, I looked at other brands. They are a similar price, identical size filters, and include the filter spanner.
(C) pressure locks on the filter housing. Once you've closed the valves, you must relieve pressure before it will open.
The material used in this product does not allow the ...
Amazon Customer✓ Verified Purchase•November 27, 2017
The material used in this product does not allow the "O" ring to seal properly due to the surface irregularity in the upper case. The coarse texture requires an unusual amount of torque to be applied to the canister.
Of course high temp plumbing grease (silicone) was used, but the tool will eventually fail, and this problem will persist.
Of course high temp plumbing grease (silicone) was used, but the tool will eventually fail, and this problem will persist.
Page 1 of 2
