PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 1lb in Two Cans, Charcoal Gray 167779
Key features
- •PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
- •High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
- •PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
- •Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
- •Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
- •Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
- •1 lb. PC-7 in two cans (8-oz. can of Part A and 8-oz. can of Part B)
PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 1lb in Two Cans, Charcoal Gray 167779
List Price: $34.90$31.41DEALYou Save: $3.49 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (26)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
60%
4★
20%
3★
10%
2★
0%
1★
10%
good product wish there was a liite bigger one 4 stars
J. Garner✓ Verified Purchase•September 8, 2017
good product wish there was a little bigger one or meaning a size in between the little and the large one. For the price send some wood sunday cup sticks.
But it's a good product if you've used JB...you know. Product is thicker than BJ Weld so advantage it goes where you want.
4 Stars is to make you read and make an informed decision of the product (will it work for what I need?) and what you may need it for.
It is a 5 star product for what it does, I have re-done 2 old wheels from my welder cart that the plastic was deteriorating the plastic spokes of the wheels allowing the tire to repeatedly pop off of the rim. Yes I could have easily the went and bought new wheels but some that live in remote place do not have that luxury. Hence the point of product, you could keep it around for odd repairs.
But it's a good product if you've used JB...you know. Product is thicker than BJ Weld so advantage it goes where you want.
4 Stars is to make you read and make an informed decision of the product (will it work for what I need?) and what you may need it for.
It is a 5 star product for what it does, I have re-done 2 old wheels from my welder cart that the plastic was deteriorating the plastic spokes of the wheels allowing the tire to repeatedly pop off of the rim. Yes I could have easily the went and bought new wheels but some that live in remote place do not have that luxury. Hence the point of product, you could keep it around for odd repairs.
Best stuff on the planet for epoxy
Art B✓ Verified Purchase•September 7, 2017
My wife ran into a fence post with the zero turn mower & creased the gas tank. It had a 5" split. We priced a new tank for $286.00. Ridiculous!
I have been using PC7 for 50+ years. I repaired an engine head once, so i knew it was good stuff. You mix this 50-50. First i mixed enough to fill the crease. Then using water, you can smooth this out. I left it dry for 24 hours. BTW, this is a plastic tank. Then i took a coarse wire brush and roughed up an 8" square. I mixed another batch and applied, took water and bare hand to smooth it out. Left it dry another 24 hours, and now i have a permanent repair.
This stuff dries like steel. I have drilled and tapped this with excellent results. Like the headline says, best epoxy on the planet. Much better than JB weld....
I have been using PC7 for 50+ years. I repaired an engine head once, so i knew it was good stuff. You mix this 50-50. First i mixed enough to fill the crease. Then using water, you can smooth this out. I left it dry for 24 hours. BTW, this is a plastic tank. Then i took a coarse wire brush and roughed up an 8" square. I mixed another batch and applied, took water and bare hand to smooth it out. Left it dry another 24 hours, and now i have a permanent repair.
This stuff dries like steel. I have drilled and tapped this with excellent results. Like the headline says, best epoxy on the planet. Much better than JB weld....
Results may vary...didnt work for me
ThyHorrorCosmic✓ Verified Purchase•September 1, 2017
Followed directions didnt work for me maybe bad batch...or user error directions were pretty simple though either way messed up my new floor pans 200+$ 2 + weeks and stufd is still goopy not curing its been warm well above 70+ degrees folded to uniform color used complete contents of both A & B so should be equal amounts of each...either way lots of mess to clean and out 230+$ kinda bummed
Thick and Does Not Run
DB✓ Verified Purchase•August 17, 2017
Very thick and will not run. Mixing in a 2 ounce container will be easier than mixing in a 4 ounce container. Has a reasonable working time and will set up over night.
Wish It Was Black
Bob Behrent✓ Verified Purchase•July 7, 2017
Works well. My only complaint is it has a gray tone to it. I use it for filling checks in wood slabs made into clocks or table tops. Black looks good. Gray does not. It is not a natural color found in most woods.
Page 1 of 2
