NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer
Key features
- •Nailed It: This pneumatic 16-gauge straight finish nailer features a lightweight and durable aluminum body, and an ergonomic comfort grip handle. A no mar tip prevents dents and dings, and the quick jam release lets you easily clear jams without taking the nailer apart.
- •Many Uses: This finish nail gun is great for interior and exterior finish and trim, furniture, cabinet work, staircases, base boards, shoe and crown moulding, window casing, and chair rail moulding. Sequential firing and tool-free depth adjust allow you to customize for any project.
- •The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- •Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- •Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer
List Price: $105.24$94.72DEALYou Save: $10.52 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
Happy I did
European Legs•December 29, 2017
I had my old porter cable stolen in a robbery. Was going to replace with the same (which is around $150) but thought I would try this. Happy I did. It works perfectly and for less than 1/2 the price. Maybe not up to professional use but for a home reno its perfect. 100's of feet of baseboards installed and no jams, no fails, no issues.
Nailed it
Benchtest•October 7, 2017
Just finished my first crown molding project with this nailer. Has ran perfect the whole time, no issues. Took it out of the box, loaded it, and have ran about 200 nails through it without a hiccup. I put 2 drops of oil (included) in the inlet after each sessions and cycle it to get the excess oil out, but other than that, no maint requirements so far.
5 stars!
dgn•May 31, 2017
unbelievable price but works very well. I had it for about a month now shooting roughly 500 fasteners mixing between 1 1/4 and 2 in. I am installing bamboo on 2nd floor and stairs. I have to reinforce the stair treads and risers with straight nails and in some floor edges as well. The tool has no problem punching thru the bamboo and subfloor. The nail depth is reasonably consistent (you need to push it down all the way). It has a depth adjustable knob as well. As for pressure range, I usually set my mini 3-gal compressor working pressure at 80psi, but it works even at below 70psi for 2in nails. It jams only one time out of 500 which is pretty impressive. That jam probably happens because I forgot to oil it after many shots. Talking about oil (also included with the tool), my guess is you need to give 2-3 drops every 100 shots or after a week if not used. This works very well for me. I highly recommend this toy. Don't waste you money on expensive brands
Replaced a Porter Cable nail gun that the trigger valve went bad on. Used with Porter Cable 2" 16G nails
LB•May 13, 2017
For the price this is competent tool. The only down side is it needs to be oiled. Used with a 150 PSI/6 Golan tank. Tested it with 3/4 inch hardwood scrap. Went through 3 boards stacked up. Proceeded to use it installing crown molding. Replaced a Porter Cable nail gun that the trigger valve went bad on. Used with Porter Cable 2" 16G nails. No Jamming yet.
Great deal on a tool that just plain works!
BlackDogTX•May 12, 2017
It is not often that you buy a tool that just works great at a bargain price, but this is one of those tools. I bought this for a project to build a base for a project I was working on, out of 1 x 4's (and a 2 x 4) and it performed flawlessly out of the box. Way easier than pounding nails by hand. No jams, used my Porter Cable 150 Pancake compressor and at about 100lbs psi drove 2 1/2" finish nails flush like a champ. Great little nailer.
Page 1 of 2
