Mount-It! Floating Wall Mounted Shelf Bracket Stand for AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Single Shelf, Tinted Tempered Glass (MI-811)
Key features
- •Mount-It! experience and guarantee. Mount-It! is the expert in television wall mounts and home theater accessories. We apply our decade long experience in this field to offer the best features at value prices. Contact our friendly customer support team for any questions or issues.
- •Elegant, modern and decorative steel plate and glass single wall shelf designed to hold DVD players, DVRs, HD recorders, Cable TV Boxes, AV components, gaming systems, for storage of CDs, DVDs and any other media, even to mount projectors. It will complement your wall mounted TV and help you achieve an uncluttered look with no need for large media stands or TV furniture.
- •With its heavy-duty design, this shelving system can support up to 30 lbs on each shelf. The tempered black glass is 6 mm (approximately 1/4 inches) thick. The sturdy arm that connects the shelf to the wall bracket protrudes away from the wall to allow up to 10 degrees of swivel left or right.
- •Shelf size: 18.1 inch Wide, 16 inch deep. The black tempered glass shelf is tinted and is oversized to support of various equipment. Heavy-duty steel wall bracket measures 9 inches high and should be installed on a wall stud for safe floating shelf installation. The wall bracket has cable management holes that allow you to route cables neatly to your components.
- •Standard mounting hardware and easy to use instructions included. It is very easy to install. Use multiple units to hang all your components. This shelf can be installed in one corner on the wall with an adjacent on the other corner. Easy to mount the shelf on the wall with the provided wall-mounting bracket.
Mount-It! Floating Wall Mounted Shelf Bracket Stand for AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Single Shelf, Tinted Tempered Glass (MI-811)
List Price: $67.61$60.85DEALYou Save: $6.76 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.2
out of 5
Based on 10 reviews
5★
50%
4★
20%
3★
20%
2★
0%
1★
10%
Three Mount-It! Purchased and Installed
Kayla Howard✓ Verified Purchase•August 28, 2017
We purchased three and used them on a 50", 47" and 32" size tv's. They are worth the time and effort needed to assemble and mount. I read through other reviews and the most helpful was to thread the wires prior to mounting. Map out your wire length and and wire placement before starting. It will help if you have three or more wires. We had all the required parts, had no faulty pieces and the no complaints with the setup. You will need another person to help hold the shelf for the last portion of the assembly. We did use a stud finder and drill to complete this project.
Too much play at the hinge to hold shelf level
R. Reed✓ Verified Purchase•March 30, 2017
I would give this product 5 stars but for one issue. Once mounted, there is substantial play in the mounting pin which causes the shelf to tilt. I am using 2 of these shelves to hold my Yamaha receiver, 22 lbs on one and my Xbox One on the other. I had to make a shim to place around the long bolt that holds the arm to the wall mount in order to compensate for some of the play. Even then, I would say the front edge of the shelf dips by 1/4 inch. The plastic shims I made have allowed this to work, but it could be so much better.
Nice shelf. Wrong hardware.
Bruce Adams✓ Verified Purchase•January 11, 2017
The shelf is quite nice, with a sleek look. The issue I had with it is the swivel hole in the shelf arm was larger than the holes in the wall mount or the swivel bolt. I think the bolt and wall mount bushings were 1/4" and the bushing in the shelf arm was 5/16". At any rate, it meant the shelf tipped down and didn't feel solidly mounted. I had to go to a hardware store and buy a 5/16" bolt, washers and Nylock nut, then drill out the bushings in the wall mount. After that I'm very happy with it, but that shouldn't be the purchaser's job. I subtracted 2 stars for that, but others may have simply returned it.
Looks good when mounted but is a little tricky
101Eagle✓ Verified Purchase•October 28, 2016
This shelf works well once mounted but getting it mounted requires two people. I recommend assembling the shelving first so you can have a rough idea where the mounting plate should go. Another design improvement would be to make the hole in the top plate large enough to fit a plug for a power strip.
Beware
Amazon Customer✓ Verified Purchase•February 10, 2016
I purchase this exact unit back in 2012. Today while I was in another room I heard this loud bang and what sounded like a truck load of marbles hitting the floor! What the blank?? One of the shelf's gave out for no reason! What a mess, glass everywhere. I found glass 12 feet from where it happened. I am thankful no one was setting near or my grandson playing near these shelf's. True I purchased this 4 years ago and I was happy with the unit, but I cannot give this product a positive review knowing the possibility this could happen to someone else. These glass shelf's are only supported were they attach to the wall mount. Just beware.
Update
I wanted to add some pic's to give you a better idea of what happened. The set-top box is an Xfinity RNG-150N which measures 8 x 10 and weighs 3 pounds. So weigh was not an issue. The picture doesn't show the very fine sharp glass slivers which left scratches on both the DVD player and the wood floor. I can't imagine what this would have done to a person.
Update
I wanted to add some pic's to give you a better idea of what happened. The set-top box is an Xfinity RNG-150N which measures 8 x 10 and weighs 3 pounds. So weigh was not an issue. The picture doesn't show the very fine sharp glass slivers which left scratches on both the DVD player and the wood floor. I can't imagine what this would have done to a person.
Page 1 of 2
