StarTech.com 2U Server Rack Shelf - Universal Vented Rack Mount Cantilever Tray for 19" Network Equipment Rack & Cabinet - Heavy Duty Steel - Weight Capacity 50lb/23kg - 16" Deep Shelf, TAA
Key features
- •Add a sturdy, vented shelf into almost any server rack or cabinet
- •Compatible with StarTech.com RK2236BKF
- •2U Server Rack Shelf / Fixed Vented Rack Shelf / Rack Mount Shelf
- •50lbs (22kg) Weight capacity
- •16in (406mm) Deep fixed shelf
- •Universal rack shelf fits all standard 19in wide server racks or cabinets
- •Supply additional storage space for mission critical hardware and non-rack mount equipment
- •For use with all 19" wide server racks and cabinets
- •2U Vented Rackmount Shelf
- •Fits all standard 19" server racks
- •SPCC 1.6mm Cold-rolled steel construction
- •Front mount design
StarTech.com 2U Server Rack Shelf - Universal Vented Rack Mount Cantilever Tray for 19" Network Equipment Rack & Cabinet - Heavy Duty Steel - Weight Capacity 50lb/23kg - 16" Deep Shelf, TAA
List Price: $70.62$63.56DEALYou Save: $7.06 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (46)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.6
out of 5
Based on 10 reviews
5★
70%
4★
10%
3★
20%
2★
0%
1★
0%
High quality, front lower lip interferes with the space below, so this might be effectively a 3U unit.
Frobisher✓ Verified Purchase•July 14, 2017
This is one of those cases where what you get is exactly what you'd expect, from what you see on the web, other than that it's sturdier with thicker steel than I had expected for about $30. It comes with the little thingies (sorry) you put in the square holes so that you can use the screws to anchor it, and they go in more easily than any other I've used, which was a nice plus. Once all 4 screws are in, it feel really sturdy.
There are a couple of things that I would change if I could:
1) The lip on the front, while I understand strengthens the unit and prevents flex, also blocks the upper part of the space below it. Because I didn't have a server below the 2 unit space I was putting this in, it didn't matter, though the "filler bar" won't go back in. I suspect that if I had a server in the space below it, that I wouldn't be able to pull the server out without removing this. I'm not sure of that.
2) I'd have like to have had a raised lip on the back. Nothing sharp that would dig into wires, but something blunt that would prevent anything from rolling off and perhaps this would eliminate the need for the lower lip in the front.
Those things aside, this is a nice piece, well made for the money, and I'm not sorry I have it.
There are a couple of things that I would change if I could:
1) The lip on the front, while I understand strengthens the unit and prevents flex, also blocks the upper part of the space below it. Because I didn't have a server below the 2 unit space I was putting this in, it didn't matter, though the "filler bar" won't go back in. I suspect that if I had a server in the space below it, that I wouldn't be able to pull the server out without removing this. I'm not sure of that.
2) I'd have like to have had a raised lip on the back. Nothing sharp that would dig into wires, but something blunt that would prevent anything from rolling off and perhaps this would eliminate the need for the lower lip in the front.
Those things aside, this is a nice piece, well made for the money, and I'm not sorry I have it.
Solid.
C. Purdy✓ Verified Purchase•September 10, 2016
Solid. 2U with 4 attach points on each side. Back lip welded. Just what I needed for a super-heavy Yamaha MX-A5000 amp (56 pounds) that lacked a rack mount kit.
Pros:
* Heavier gauge steel
* No flaws noted
* Welded back lip (adds rigidity where you need it most!)
* Good attach points
Cons:
* None. Seriously, none.
Pros:
* Heavier gauge steel
* No flaws noted
* Welded back lip (adds rigidity where you need it most!)
* Good attach points
Cons:
* None. Seriously, none.
Good shelf, 6mm screws and cage nuts
Lee R✓ Verified Purchase•April 3, 2016
Good sturdy rack, holds my 20# or so of equipment with no problems. Good price and quality.
Some reviewers question whether the included screws fit "standard" racks. This ships with 6mm screws and cage nuts. If your rack uses cage nuts there should be no problem. My rack has pre-threaded 10-32 threads so I used my own screws. If you have pre-threaded holes it's good to keep a few extra screws on hand.
Some reviewers question whether the included screws fit "standard" racks. This ships with 6mm screws and cage nuts. If your rack uses cage nuts there should be no problem. My rack has pre-threaded 10-32 threads so I used my own screws. If you have pre-threaded holes it's good to keep a few extra screws on hand.
Beautiful finish, great load capacity, very happy.
David A. Lawson✓ Verified Purchase•January 3, 2016
great price and sturdy to support most any device in reason. better quality and support than most i have seen. I appreciate the rolled edges to provide better back end support - something I have seen other and higher priced products lack.
Fit and finish is perfect and happy to get caged nuts and bolts - I have a few bags left from other installs, but always great to have them included - and these are better than the ones I have.
Fit and finish is perfect and happy to get caged nuts and bolts - I have a few bags left from other installs, but always great to have them included - and these are better than the ones I have.
Perfect fit for 2U Dell R720 Server!
Brian Mashbun✓ Verified Purchase•January 22, 2015
Perfect fit for our Dell PowerEdge R720 in our 19" 2-post rack. Our rapid-rails that came with our server did not have the sliding center bracket for the 2-post rack .. so this was a great solution for getting it mounted.
Page 1 of 2
