Dash Cam Mirror Mount Kit for Rexing V1,Falcon F170,Z-Edge,Old Shark,YI,Kdlinks X1,VANTRUE and Most Dash Camera and Car Camera
Key features
- •Buy one dash cam, buy one dash cam mirror mount. MUST HAVE for dash cam!
- •New 7 different joints kit suitable for most car dash cam on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.
- •Mount your dash cam behind car rearview mirror, provides better drivers' view. Real 360 degree rotation design, adjust to any angle you want.
- •Exclusive 9.70mm ultra-slim design SnakeMount, suitable for most car rear view mirror.100 percent sturdy dash cam mirror mounting solution.
- •Heat-resistant. Never fall off the windshield. Never.
Dash Cam Mirror Mount Kit for Rexing V1,Falcon F170,Z-Edge,Old Shark,YI,Kdlinks X1,VANTRUE and Most Dash Camera and Car Camera
List Price: $19.38$17.44DEALYou Save: $1.94 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
60%
4★
20%
3★
10%
2★
10%
1★
0%
Not compatible with Vantrue N2
Luke C•September 3, 2017
As others have mentioned, though I neglected to check ahead of time, this does not fit the Vantrue N2. Overall quality looks solid and I really wish I could've used these.
Another thing to check, make sure you have enough clearance behind your rearview mirror. My 2014 Honda Odyssey had plenty of room, but the BMW F32 did not. Not that it mattered since the mounts didn't fit my dash cams anyway, but it's something else to consider before purchasing these.
Another thing to check, make sure you have enough clearance behind your rearview mirror. My 2014 Honda Odyssey had plenty of room, but the BMW F32 did not. Not that it mattered since the mounts didn't fit my dash cams anyway, but it's something else to consider before purchasing these.
Very good bracket
Scott Wiblemo•August 27, 2017
Fit my YI camera perfectly. Also includes multiple attachments for other cameras, which I do not need right now. Installing it on the rear view mirror was not as easy as I expected, mostly because of the limited space between the mirror and windshield. There is a silicone strap to wrap around the mirror stem and I used a small piece of electrical tape to hold it in place while I put the wing nuts on the bracket. Once the bracket was tightened I attached the camera and went for a drive. The camera was kept motionless as evidenced by the lack of 'jitters' in the replay. I won't know about longevity for a while but it feels solid. The mounting bracket works great and I recommend it.
It would have been so easy to make and include an additional longer arm
Rob C•July 30, 2017
I really wanted this to work, but there's a few things that prevent this from working for me.
First and foremost, if the arm connecting you rear-view mirror to the windshield is short, and there's isn't a lot of room DO NOT GET THIS PRODUCT. The wingnuts and thumbscrew for this product are hilariously large and need a lot of room to tighten. I.E. If you don't have a lot of room back there, you won't be able to tighten anything down, or you'll scratch the hell out of the back side of your rear-view mirror.
Another issue I have with this product is that the arm is quite short, and there's no short of extension arm. It would have been so easy to make and include an additional longer arm.
First and foremost, if the arm connecting you rear-view mirror to the windshield is short, and there's isn't a lot of room DO NOT GET THIS PRODUCT. The wingnuts and thumbscrew for this product are hilariously large and need a lot of room to tighten. I.E. If you don't have a lot of room back there, you won't be able to tighten anything down, or you'll scratch the hell out of the back side of your rear-view mirror.
Another issue I have with this product is that the arm is quite short, and there's no short of extension arm. It would have been so easy to make and include an additional longer arm.
Amazing product
Mgr_Brz•July 20, 2017
That's so many accessories (connectors) on this product that you probably are able to install in about everything. It took me about 30 min to install it in my car (because of the lack of space, not the product - 2017 camaro), that I almost gave up, and I am glad that I didn't. Installed in a Rexing V1N really close to the windshield and it's hard to see from outside. I love it.
The connector for Rexing V1N just broke of, so you have to be really careful to handle this product (in case you want to remove the camera to protect from heat). I manage to take one of unused parts that comes with it and rebuild a "new" connector (using epoxy to fix it).
Now it looks very sturdy.
Still 5 stars thought!!!!!
The connector for Rexing V1N just broke of, so you have to be really careful to handle this product (in case you want to remove the camera to protect from heat). I manage to take one of unused parts that comes with it and rebuild a "new" connector (using epoxy to fix it).
Now it looks very sturdy.
Still 5 stars thought!!!!!
Great Idea Needs Improvement
campingfriend•April 12, 2017
I had issues with the suction cup sticking to the windshield. The manufacturer of my dash cam did send a replacement suction cup unit, but it was damaged and of coarse the suction cup would stick to glass for a few minutes and pop off. I ordered the AmorTek SnakeMount-Dash Cam Mirror Mount and it is holding my dash cam in place however, it needs to extend more so I can access all of the dash cam.
Page 1 of 2
