Promenaid 5ft ADA Handrail Kit - Champagne - Complete Indoor/Outdoor Handrail for Stairs - 1.6" Round Anodized Aluminum Railing with 3 Nickel Plated Pivoting Brackets & ADA Wall Returns
Key features
- •Elegant champagne silver anodized finish and matte nickel-plated hardware
- •Indoor-outdoor, wet or dry use, zero maintenance, ready to install
- •Meets all residential and commercial codes - each bracket supports 500 lbs.
- •Handrail Brackets pivot to align with studs, fast clip-in anywhere on railing without fasteners
- •Easy to trim to any length if desired with standard miter saw
- •Patented brackets clip in anywhere and pivot to align with wall studs
- •The satin anodized finish is durable and maintenance-free
- •Oak & Walnut models always 100% straight, dent-resistant
- •The round 1.6" profile ensures non-slip grasp for all finishes. An anti-slip insert on the underside adds additional grip
- •Promenaid complies with all residential and commercial codes
- •All components fit together without drilling or gluing or additional finishing
- •Handrails come pre-cut to the foot, but are easily trimmed to the inch with a standard miter saw
Promenaid 5ft ADA Handrail Kit - Champagne - Complete Indoor/Outdoor Handrail for Stairs - 1.6" Round Anodized Aluminum Railing with 3 Nickel Plated Pivoting Brackets & ADA Wall Returns
List Price: $273.86$246.47DEALYou Save: $27.39 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
60%
4★
40%
3★
0%
2★
0%
1★
0%
very good railing
Great Zod✓ Verified Purchase•September 29, 2023
I got these for two deck stairs railings. I used them as secondary continuous railings that is needed to pass the California code.
Pros:
- Very well made.
- Good metal and well painted.
- Nice design for the supports;
- Certainly a do-it-yourself kind of railing
- shipping on time, packaging good
Cons:
- Expensive.
- The prepackaged options either have too many or too little of the supporting hardware depending on your situation. A reasonably priced ala-cart would have been better.
- When connecting the rails to the end pieces, there is always a visible gap at the connection. The two pieces basically need to exactly meet at the junction but they never do. Especially if you have to cut one. That means water can get in (in case of outdoor use). An overlapping fit would have been better.
- You sometimes get to a catch 22 situation when installing these rails on stairs. The railing supports head tilts left and right to accommodate the needed slope. It has a screw that needs to be tightened so it can keep its angle. you need to install the rail and the tilting head support to see what that angle is, but then you cannot fasten the screw that holds the head's angle after installation because it is either blocked by the post or the wall, unless you have a 90-degree screwdriver. If you fasten the screw before installing the railing, you are at best guessing the angle and you may be wrong and have to uninstall, reinstall.
I am generally very happy with the product.
Pros:
- Very well made.
- Good metal and well painted.
- Nice design for the supports;
- Certainly a do-it-yourself kind of railing
- shipping on time, packaging good
Cons:
- Expensive.
- The prepackaged options either have too many or too little of the supporting hardware depending on your situation. A reasonably priced ala-cart would have been better.
- When connecting the rails to the end pieces, there is always a visible gap at the connection. The two pieces basically need to exactly meet at the junction but they never do. Especially if you have to cut one. That means water can get in (in case of outdoor use). An overlapping fit would have been better.
- You sometimes get to a catch 22 situation when installing these rails on stairs. The railing supports head tilts left and right to accommodate the needed slope. It has a screw that needs to be tightened so it can keep its angle. you need to install the rail and the tilting head support to see what that angle is, but then you cannot fasten the screw that holds the head's angle after installation because it is either blocked by the post or the wall, unless you have a 90-degree screwdriver. If you fasten the screw before installing the railing, you are at best guessing the angle and you may be wrong and have to uninstall, reinstall.
I am generally very happy with the product.
Sturdy, handsome, effective -- not quite as easy to install as I'd hoped
P. Berry✓ Verified Purchase•September 22, 2023
I installed this as a horizontal grab bar the length of 13-foot passage. For shipping, it was delivered in two pieces that must be joined. (For some reason the sections delivered were 2' longer than ordered.) The underside of the bar is a channel into which the support brackets can be fitted at any point. That makes it easy to attach brackets at just the right position to line up with the studs in the wall. The mounting brackets lock into the channel by rotating them 90º. The instructions don't make clear that you really should do this _before_ you position the bar against the wall, because otherwise you may not have enough room to rotate the brackets.
The instructions for joining the two sections don't make clear that, when you cut off the excess length, it is vital that the cut be at _exactly_ 90º. You need a mitre box or similar guide for the saw, and will need to sand or file the edges to get a smooth fit. Even a slight error will introduce a kink at the join. You'll find it much easier to get mounting right if you have at least two people to hold the bar in place while drilling holes for the mounting screws.
The instructions for joining the two sections don't make clear that, when you cut off the excess length, it is vital that the cut be at _exactly_ 90º. You need a mitre box or similar guide for the saw, and will need to sand or file the edges to get a smooth fit. Even a slight error will introduce a kink at the join. You'll find it much easier to get mounting right if you have at least two people to hold the bar in place while drilling holes for the mounting screws.
Beautiful, functional and chic!
Barb’sArt✓ Verified Purchase•September 21, 2023
The handrail is sturdy yet attractive and fits the shower nicely. We like it and feel it's perfectly comfortable.
Return and replace
w.t.✓ Verified Purchase•September 16, 2023
This company has a great customer service. I had the wrong size sent to me and contacted Amazon. I was forwarded to the company and the correct order, which was not their fault, was immediately corrected and the size I needed was sent ASAP at no charge to me. I highly recommend Promenaid for your next project. 5 STARS PLUS.
Great Product, EXCELLENT Customer Service
Becky D✓ Verified Purchase•August 16, 2023
We purchased a handrail for our back patio. It came pretty quickly and was nice quality. It looks great and feels very nice on the hands.
When we went to install, we decided we had purchased one that was too short. (this was OUR issue, not mfg issue). We also ordered the wrong ends (there are curved end caps and flat end caps). We used the Amazon site to communicate with the seller/manufacturer. They responded very quickly answering questions. They worked with us to replace the handrail bar with a longer one (all the other original parts were usable on the longer bar), and get the end caps we wanted.
The seller/manufacturer went ABOVE and BEYOND to help us with an issue that was totally our fault. We would definitely buy from this Manufacturer again!
When we went to install, we decided we had purchased one that was too short. (this was OUR issue, not mfg issue). We also ordered the wrong ends (there are curved end caps and flat end caps). We used the Amazon site to communicate with the seller/manufacturer. They responded very quickly answering questions. They worked with us to replace the handrail bar with a longer one (all the other original parts were usable on the longer bar), and get the end caps we wanted.
The seller/manufacturer went ABOVE and BEYOND to help us with an issue that was totally our fault. We would definitely buy from this Manufacturer again!
Page 1 of 2
