OxGord Hitch Tightener for 1.25" to 2" Inch Hitches - Anti-Rattle Stabilizer - Heavy-Duty Lock Down Trailer Tow Clamp Silencer, Rust Free 304 Stainless Steel
Key features
- •FITS: Hitch classes I, II, III, and IV (1, 2, 3, & 4) for 2" and 3.75" Hitches.
- •QUIET & VERSATILE: Eliminates hitch noise, clanking, wobble, rattle, jerking, and hitch movement; making this item ideal for a variety of trailers, racks, and carriers, including: cargo carriers, hitch receivers, trailer ball mounts, bike racks, hitch racks, cars, trucks, vans, SUV's, RV's, boats, motorcycles, ATV's, etc.
- •DURABLE: Constructed from heavy duty powder coated galvanized steel, this anti-rattle hitch tightener stabilizer won't rust or corrode. Making it the optimal choice for moist/wet/humid climates with rain and snow.
- •EASY TO INSTALL: Simply mount the anti-rattle hitch tightener by sliding the U-bolt over the stinger, inserting the tightening plate into the bolt, and fastening it in place with the included hardware. Includes on (1) U bolt, one (1) tightener plate, two (2) flat washers, two (2) lock washers, and two (2) nuts.
- •Made by a trusted brand OxGord.
OxGord Hitch Tightener for 1.25" to 2" Inch Hitches - Anti-Rattle Stabilizer - Heavy-Duty Lock Down Trailer Tow Clamp Silencer, Rust Free 304 Stainless Steel
List Price: $44.52$40.07DEALYou Save: $4.45 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.6
out of 5
Based on 10 reviews
5★
20%
4★
60%
3★
10%
2★
0%
1★
10%
Good hitch stabilizer once you get all the parts
Shutterbug✓ Verified Purchase•September 8, 2017
This is a great accessory if you can get one with all the parts intact. It comes in a loose-fitting bag. I purchased three on three separate orders and each one was incomplete requiring a trip to the hardware store to get the necessary washers and nuts. Also the U bolt is quite long and if your hitch is low they can drag the ground when going through a driveway, so I had to cut off about an inch of threads on each side. But once all this is done, it is a solid unit that works well.
Note the proper installation is not shown but you put the U bolt over the top of your hitch that goes into the receiver and the plate on the bottom so that the flat side goes over the receiver and the lip presses against the straight part of the hitch that goes into the receiver. Slide it as far as it will go against the receiver and tighten evenly (a little on one side and then the other and back and forth). Some people mount it upside down with the threads of the U bolt pointing up, but this means that the U bolt is carrying the entire load of the tongue weight which it is not designed to do.
Note the proper installation is not shown but you put the U bolt over the top of your hitch that goes into the receiver and the plate on the bottom so that the flat side goes over the receiver and the lip presses against the straight part of the hitch that goes into the receiver. Slide it as far as it will go against the receiver and tighten evenly (a little on one side and then the other and back and forth). Some people mount it upside down with the threads of the U bolt pointing up, but this means that the U bolt is carrying the entire load of the tongue weight which it is not designed to do.
Works Great
Gregory✓ Verified Purchase•September 4, 2017
This is perfect for my loose hitch. Openings vary and the noise on a rough road can be very annoying. With the trailer tongue properly adjusted to slightly snug fit and this tightened down I have a much quieter ride. No more rattle with a lightly loaded trailer.
And it looks like it's Chinese metal
digger357✓ Verified Purchase•September 4, 2017
Junk, its way big and wont fit either of my receiver hitches. I'm stuck with it unless I can find someone I know to give it to. And it looks like it's Chinese metal.
Works, bolts show..
Travis✓ Verified Purchase•August 7, 2017
Once my mechanic told me which way to put it, it works as I wanted but isn't the best looking.
Like other reviews
Pat M✓ Verified Purchase•July 28, 2017
Like other reviews... package during shipping was horrible. It was missing a washer. Grabbed one from my toolbox to make work. Functions great as a anti-rattle stabilizer. Drove from NJ to NC and back with it on. If they packaged the item better when shipping, I'm sure all reviews would be 5*
Page 1 of 2
