Inkbird ITC-106VH PID Temperature Thermostat Controllers F and C 100 to 240ACV K Sensor 40DA SSR Solid State Relay for Sous Vide Home Brewing
Key features
- •Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.
- •Dual display window, be able to display measured temperature and set temperature at the same time
- •Simplify operational processes and you don't need to operate more steps if you want to set the definite value
- •High accuracy of displaying and controlling. Manual and Auto turning are available
- •Power Supply Voltage: AC 100-240V 50/60Hz
Inkbird ITC-106VH PID Temperature Thermostat Controllers F and C 100 to 240ACV K Sensor 40DA SSR Solid State Relay for Sous Vide Home Brewing
List Price: $62.84$56.56DEALYou Save: $6.28 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It August 9, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.7
out of 5
Based on 10 reviews
5★
60%
4★
30%
3★
10%
2★
0%
1★
0%
works fantastic!! AWESOME customer support
JTWJR•March 7, 2018
works fantastic!! AWESOME customer support!!!
Flawlessly Does Its Job
STG•February 21, 2018
This does everything it claims to and works perfectly. Programming it using the loosely translated instructions takes a little imagination and insight into what they mean to say, but once you get the hang of it, it's really a perfect little temperature controller.
The fact that you get everything you need all at once, and that it all works together right out of the box is a big plus. Also, unlike a lot of these, you can set it to °F, not just °C, so it's much more useful here in the USA.
The included temperature probe is a little fragile where the connectors are crimped on the ends of the wires, but care in handling and a bit of shrink tubing can fix that easily.
The fact that you get everything you need all at once, and that it all works together right out of the box is a big plus. Also, unlike a lot of these, you can set it to °F, not just °C, so it's much more useful here in the USA.
The included temperature probe is a little fragile where the connectors are crimped on the ends of the wires, but care in handling and a bit of shrink tubing can fix that easily.
Accurate temp control and programmable deadband.
Larry King•January 9, 2018
A little more of a project than I realized, but a great little device. Way more features in terms of process control than I needed. It does allow me to control the temp of my wife's green house as close as you want. I am using two electric heaters who's temp control is very erratic and not calibrated. Saves a lot of electricity since I can now specify on at 40, off at 41 degrees and never find the two heaters running at 50 degrees.
Five Stars
Amazon Customer•January 6, 2018
As advertised
Poor Themocouple quality control.
Russ•December 26, 2017
The reason for the three star review is not because of the PID, it is very nice and works great. However, the thermocouple that comes with this unit seems to be a trouble spot for many people. The one that came with my unit worked OK the first day, then all hell broke loose. The second day when I turned on the PID, temperature readings were all over the place. Wiggling the thermocouple wires where they connected to the PID changed the temperature several hundred degrees. After a closer inspection I saw that the blue crimp connector was crimped onto the wire without stripping back the insulation. To fix the issue I cut both connectors off, stripped back the insulation and made a direct connection to the PID without using crimp connectors. The PID now works perfect and temperature readings are very stable.
Page 1 of 2
