Nice wire I bought a total of three different sizes after the first showed to be very high quality. I will be buying more as needed. I use for modeling and hobby work.
The box has little holes to run the wire through that works great, after reading another reviewers post and following those instructions.

I'm a little Disappointed in the quality of the wire Especially the insulation , I would Definitely not use it in High voltage and heavy current applications
But most of my projects are low voltage 5v - 9 v. And it should be fine for that . The Dispenser boxes Are not the best either. Only One set of holes can be used and still be able to close the box , Both those should be punched on the same same .This Wire is way over priced for the Quality you receive ,. But I do like the Small spools inside and I will keep those for other uses ... overall I will give 4 Stars * * * *

The wire is just fine. Unfortunately, and this is my fault, my wire cutter didn't exactly fit the thin gauge on these wires. I had to get a different wire cutter, which is not the fault of the wires. However what is the fault is the mechanism by which these spools are held in the box. It's flimsy at best and after just a few days of use, the spools were a mess. The wire itself however works just fine and I had no problems soldering.

I got this wire because the 40 year old solid core 30ga wire-wrap wire I had on hand was not suitable to use for hacking my Kindle. It. broke. too. easily. Plus, the only color I had was yellow. tl;dr: I am not disappointed once I made a few adjustments.

I have stripped a couple of these wires using my 40 year old wire-wrap wire stripper. The last image will hopefully show that, yes indeed, this is 30gs stranded wire. I suspect they drew the wire through a mosquito's mouth. I could not find anything online today that even vaguely resembles my stripper. I did not look only on Amazon. I looked online. In spite of having gazillions of products, Amazon doesn't have everything. My one-stop shopping experience has been irrevocably ruined! Gee, thanks Amazon.

You can see the stripper I use in the last picture I've posted with this review. 40 years ago it was the most expensive tool I owned.

I do, though I've not tested it, have a wire-wrap tool very similar to this JDV Products HSR30 Tool, Wire, Wrap/Unwrap Strip, Regular with which I have successfully stripped 30ga solid core wire in the past. OK, the way way past.

Pros:
- The wire is stranded and very flexible. It almost couldn't be more flexible if it was thread. Pleased and impressed by this.
- It came in a decently designed, functional, and sturdy box. For storage and dispensing I cannot stress how helpful this is and will be.
- The box has a cross dowel that keeps the reels of wire off the bottom of the box allowing for easier dispensing without binding.
- There are holes for the wire to come out. You don't have to take the reel out of the box.

Cons:
- The picture lies! The holes for the wires to come out are not in the bottom third of the box. They're in the top third. Facts are important!bought. eople! 9-)
- While the box the reels of wire came in is designed to use to dispense the wire, there is nothing to provide tension during the dispensing of the wire. Obviously too much tension will stretch or break the wire which would not be helpful. A thin bit of foam rubber on the underside of the lis which closes down on the reels might do the trick. Alas, I'm stuck trying a different approach.

To fix the tension issue, to help keep the wires from becoming too loose on their respective reels, and to help chaperone the wires to stay one only their own reels I did two things.

First, I glued a strip of VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140), hook-side to the box. A second strip, just a tad longer, covers hooks to the glued strip thereby holding the wires flush to the box.

Second, I cut the corner off a bit of cardboard and placed it between the back of the box and the wire reels. A picture is provided to help those, like me, who have impaired imaginations. Note, the bend of the corner is in the middle. My hope is that this cardboard insert will suffice in providing enough tension; however, of course, not too much tension.

Fantastic. The silicone insulation makes for a very flexible wire, so it's quite nice for when you need a new aux cable or other wires that don't go inside a case.
For some strange reason they put it in an anti-static bag for shipping. It's not exactly a sensitive component, guys, you don't need to go to that effort here.