5 Inch AHD 800x480 Backup Camera Monitor, GreenYi-08 TFT LCD Color Screen, Two Video Inputs Screen for Rear View Camera with Two Brackets, Perfect for Our AHD Back up Camera
Key features
- •5" 800*480 TFT-LCD COLOR MONITOR---Anti-glare, compatible with both PAL and NTSC video format
- •TWO VIDEO INPUTS---You can connect it with two cameras(front and rear) or a device that could provide video output
- •EASY TO INSTALL---Holder with adhesive sticker, bracket is 135 degrees adjustable, fix it on the dashboard or windshield
- •CAN BE APLLIED TO MANY DEVICES---Perfect companion product for a RCA backup camera, video equipment like VCD, DVD, GPS, satellite receiver, etc
- •WITH MENU BUTTON---Buttons on the back for you to adjust BRIGHTNESS, CONTRAST, SATURATION, TINT, LANGUAGE, MODE, RESET
BrandGreenYi
CategoryVehicle Backup Cameras
SizeMedium
ColorBlack
WarrantyWarranty---We offer 1 Year warranty for all of our products(under normal use) and lifelong service for our customers. Any questions, please contact us freely, we will reply back within 24 hours.
5 Inch AHD 800x480 Backup Camera Monitor, GreenYi-08 TFT LCD Color Screen, Two Video Inputs Screen for Rear View Camera with Two Brackets, Perfect for Our AHD Back up Camera
List Price: $61.09$54.98DEALYou Save: $6.11 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
70%
4★
10%
3★
20%
2★
0%
1★
0%
Lose swivle head. Unable to tighten.
russell•December 23, 2017
Swivel stand not stay firm. Very lose swivel. Good screen. On windshield resting in dash to keep viewable.
Nightvision scope mirror image
Amazon Customer•December 5, 2017
Initial review....bought this to use for a mirror image for another person while using my nightvision scope. Works as intended so far. They're not sitting blindly in the dark while I'm scoping pigs.
Perfect for a price
wedf•December 3, 2017
Video purists may not like resolution and colors, but it's more than enough to see what's going on behind my car even in low light conditions.
I took one star off because the monitor doesn't have an on/off button and a fuse. I had to install in-line fuse myself. Also, instructions are utterly useless: they don't even say which wire goes to the ground and which to +12v. It didn't bother me but may be a problem for someone else.
P.S. I purchased it for $20.99
I took one star off because the monitor doesn't have an on/off button and a fuse. I had to install in-line fuse myself. Also, instructions are utterly useless: they don't even say which wire goes to the ground and which to +12v. It didn't bother me but may be a problem for someone else.
P.S. I purchased it for $20.99
EXCELLENT monitor, will be buying a couple more.
Bill Bloomquist•November 29, 2017
Very well built unit. The mounting design is the best of any of these 5" monitors. It has a solid up/down (tilt) pivot assembly. When positioning for final placement, you need to rotate the monitor BEFORE you set it down on the adhesive to get the best viewing angle.
Remember, until there is an active video source, there will be no image on the screen even with power applied. To use this to watch a DVD, you must apply power directly from an accessory power source and NOT connect the monitor to the back-up lights circuit. The CAMERA should be hooked to the back-up lights circuit ONLY.
Also, on some vehicles, the on- board data buss operation MAY detect a fault if you connect the monitor to the back-up light circuit.
If it does, connect the monitor to a 12 volt accessory power source like the cigarette lighter port.
Remember, until there is an active video source, there will be no image on the screen even with power applied. To use this to watch a DVD, you must apply power directly from an accessory power source and NOT connect the monitor to the back-up lights circuit. The CAMERA should be hooked to the back-up lights circuit ONLY.
Also, on some vehicles, the on- board data buss operation MAY detect a fault if you connect the monitor to the back-up light circuit.
If it does, connect the monitor to a 12 volt accessory power source like the cigarette lighter port.
great picture & user friendly
Jerry H•November 20, 2017
great picture, used this with rear view license plate mounted camera to see behind my van at ALL times, it is addition to a factory Reverse only camera/ monitor with bumper sensors,
Page 1 of 2
