HOMONO WFEXD (30 to 50 Degree) Video (Released in 2016), Adjustment Adapter Plate/Bracket/Wedge Kit Included, Angle Mount for Ring Doorbell Pro Version-Black
Key features
- •Compatible with Ring Video Doorbell Pro Released in 2016 ONLY (Ring's Part Numbers: 88LP000CH000/RINGPRO)
- •Angle ADJUSTABLE wedge mount: Allows to adjust the angle to left or right 30 degree to 50 degree
- •Provide Greater Viewing Angle For Your Ring Video Doorbell Pro (WONT work for Ring Doorbell Generation 1st or Generation 2nd)
- •Easy to Install this Corner Kit with detailed Instruction ,Installation Can be Done Within 10 to 15 mins.(Use the existed holes for Doorbell, NO additional holes required!!)
- •Warratny: 1 year total free warranty
BrandHOMONO
CategoryKits
SizeAngle Mount for Ring Doorbell Pro-Black
ColorAngle Mount for Ring Doorbell Pro Version - Black
HOMONO WFEXD (30 to 50 Degree) Video (Released in 2016), Adjustment Adapter Plate/Bracket/Wedge Kit Included, Angle Mount for Ring Doorbell Pro Version-Black
List Price: $29.08$26.17DEALYou Save: $2.91 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 20 reviews
5★
85%
4★
0%
3★
0%
2★
10%
1★
5%
Screw holes don’t line up properly for Ring 2
CA Shopper✓ Verified Purchase•July 24, 2018
Does the wedge work, yes. Are there problems, yes. The screw holes don't line up properly with the Ring Video Doorbell 2. This leaves a sizable gap at the bottom, and would allow bugs, water, etc to get behind the Ring and short it out. See attached photos. I plan to return this and order something else that will fit better. I actually wonder if it lines up if I flip the wedge the other way, but then it would point at my front door, and not the street, rendering this useless.
Great Idea
ICE_BREAKER68✓ Verified Purchase•February 19, 2018
If your Ring Pro Doorbell is mounted on a wall that is perpendicular to your door, this adapter is a must have. Before the adapter, my ring would face the opposite wall next to the door. With the adapter, I can see the entire walkway, even though the Pro is only canted about 45 degrees, due to the wide viewing angle of the Pro. The bracket is easily adjusted. It comes with its own mounting kit and a masonry bit. But, I recommend using your own. The one with the kit is not very strong. Once mounted, there is enough room for excess wire to be pushed in between the Pro and the bracket. It also comes with its own security screw to keep the Pro securely mounted and deter theft. I'm sure there are other wedges out there. But this is the one I recommend.
Great for being able to see down the walkway. Pro Tip - See below!
reedc24✓ Verified Purchase•January 17, 2018
Perfect for adjusting the angle of the Ring Doorbell. I was afraid the doorbell would feel flimsy siting on this but it is solid and looks great.
Pro tip - If you are trying to mount your Ring Doorbell on brick over a place you had an existing doorbell, use the same anchor locations as your previous doorbell. Just measure and drill two holes in the plastic bracket where your existing anchors are (as shown in the picture) and mount it that way. Save yourself the trouble of trying to drill new anchor locations with that horrible drill bit that they give you with the Ring Doorbell.
Pro tip - If you are trying to mount your Ring Doorbell on brick over a place you had an existing doorbell, use the same anchor locations as your previous doorbell. Just measure and drill two holes in the plastic bracket where your existing anchors are (as shown in the picture) and mount it that way. Save yourself the trouble of trying to drill new anchor locations with that horrible drill bit that they give you with the Ring Doorbell.
Awesome idea for a must-buy product. Highly recommended if you own a Ring Video Doorbell
Sennix✓ Verified Purchase•January 2, 2018
It thought this product was an awesome idea from the start. My home door bell was placed oddly 90 degree angle with the gate, and this helped to adjust the angle of the Ring Video Doorbell Pro. It might not fit all Ring Doorbell, so that you need to make sure you order the correct one. This one fits mine perfectly, and it was well-built with extra screws that you need to mount and lock-in the angle. I would definitely refer it to my neighbors and friends, who also own an 'awkward' angle Ring Doorbell. Now I can watch not only who rings the bell, but also my driveway and the front of my house with motion alert function. Thumbs up!
Great solution easy to install and super happy with it!
Stubakka✓ Verified Purchase•December 1, 2017
Perfect solution, can be used in either way to angle left or right and hides the wires better then the kit it comes with. Worked perfectly to adjust my view and I love
How much it improved it. Check out the before and after photos attached.
How much it improved it. Check out the before and after photos attached.
Page 1 of 4
