Upgraded Version of Walk Traction Ice Cleat Spikes Crampons,True Stainless Steel Spikes and Durable Silicone,Boots for Hiking On Ice & Snow Ground,Mountian.
Key features
- •HIGH QUALITY STAINLESS STEEL SPIKES:Abrasion-resistant 19 multi-directional enhanced stainless steel spikes.Welding chain stronger,with more robust spikes.High Strength STAINLESS STEEL SPIKES provides excellent traction on a variety of icy surfaces.Strategic placement of spikes ensures equal distribution of weight for long-lasting comfort and durability.
- •MORE SAFE AND DURABL:The link of this crampon use welding chain and more stronger stainless steel chain.This ice traction cleat would give you more confident while walking on the ice or snow.These ice cleats would not rust and would more firm and durable.
- •REDUCE INJURY:Cover is made by Silicone,not the general TPR rubber,highly elastic and won't tear or snap.Tested to remain flexible to -60degrees F,full-sole coverage with cleats on heel and forefoot maintain traction through your normal stride.Aggressive cleats and treads prevent slips and falls on ice,snow,and wet pavement.
- •EASY TO WEAR AND CARRY EASILY:Proprietary silicone provides a flexible,lightweight,all-day traction solution.They fit easily and securely over your own shoes or boots and fold small enough to keep in a pack,or in your car.
- •WIDELY USED:Suitable for both male and female of any age of teenagers,adult,elders.Suitable for Outdoor Ice And Snow,hiking angled terrain,icy roads,ice driveway,dangerous sections of trail (ice covered boulders,woods ice mud,etc.)Great for winter trail running,hiking,and ice fishing.
Upgraded Version of Walk Traction Ice Cleat Spikes Crampons,True Stainless Steel Spikes and Durable Silicone,Boots for Hiking On Ice & Snow Ground,Mountian.
List Price: $36.30$32.67DEALYou Save: $3.63 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
50%
4★
50%
3★
0%
2★
0%
1★
0%
Good Cleats once Modified
Ravin' Mad✓ Verified Purchase•October 19, 2023
My first hike using EnergeticSky cleats was great. 2-6 inches of dry snow. However, my second hike was in 6-12" of snow that turned mushy as the day wore on -- see picture of snow covered cleat. If you look closely at the heel you will see a ball of snow -- it is really compressed to an ice ball. I'm sure as a kid you may have had a snowball fight or built a snowman with some of this type of snow.
The cause of this clumping into a ball on the heel of my cleats is that the cleats are too big. They are made for hiking boot sizes 11-14, and the silicone webbing does not tighten them enough for my size 12s. There is a lot of extra cleat I do not need. Enough that even drawn as tight as possible on my boots, the cleat chains flapped at the heel making snow balls. My fellow hiker recommended removing one link of chain from front and rear of both sides of the cleat. Back in my garage I did this, but found that the cleat rode too far forward -- look closely at the pictures of the mounted cleats and you will see how one set rides way too far forward. You want the aft spikes to be centered on the heel and the forward spikes to be centered on the front of the boot tread. His modification worked for him, but not me.
My solution for a good fit on a man's size 12 hiking boot:
Remove two chain links from each side of the heel. See picture with chains centered on heel. Count the remaining links. This leaves only one link on each side of the heel. This got my cleats riding correctly on the heel of the boot with no play. I used the tools pictured -- what I had on hand -- along with a Workmate.
Removing the links: Do not remove welded links -- just those you can pry apart (see pix of removed links). I used a homemade punch. Use what you have as long as it is tapered and when inserted in the chain link will spread the link apart so it can be removed. Once the punch is started in the link with a hammer, I placed it over a hole in my Workmate and give it a couple hits. To relink the remaining chain, fit the link back in with the open space facing the cleat side that will be against the sole of the boot. I used heavy duty needle nose pliers and a hammer to re-close the link. The vice grips just help stabilize things and save fingers.
Tips: Some people have breakage issues with cleats. Cleats, like tire chains, need to be mounted correctly. If there is a kink or a twist in a link of chain, it will most likely break. So when you put these on, look -- or have a hiking partner look -- to ensure there are no kinks or twists.
I'm sure removing links will end the warranty, but hiking with snowballs could end my ankles. I figured it was worth it to get them to work.
Happy Hiking!
The cause of this clumping into a ball on the heel of my cleats is that the cleats are too big. They are made for hiking boot sizes 11-14, and the silicone webbing does not tighten them enough for my size 12s. There is a lot of extra cleat I do not need. Enough that even drawn as tight as possible on my boots, the cleat chains flapped at the heel making snow balls. My fellow hiker recommended removing one link of chain from front and rear of both sides of the cleat. Back in my garage I did this, but found that the cleat rode too far forward -- look closely at the pictures of the mounted cleats and you will see how one set rides way too far forward. You want the aft spikes to be centered on the heel and the forward spikes to be centered on the front of the boot tread. His modification worked for him, but not me.
My solution for a good fit on a man's size 12 hiking boot:
Remove two chain links from each side of the heel. See picture with chains centered on heel. Count the remaining links. This leaves only one link on each side of the heel. This got my cleats riding correctly on the heel of the boot with no play. I used the tools pictured -- what I had on hand -- along with a Workmate.
Removing the links: Do not remove welded links -- just those you can pry apart (see pix of removed links). I used a homemade punch. Use what you have as long as it is tapered and when inserted in the chain link will spread the link apart so it can be removed. Once the punch is started in the link with a hammer, I placed it over a hole in my Workmate and give it a couple hits. To relink the remaining chain, fit the link back in with the open space facing the cleat side that will be against the sole of the boot. I used heavy duty needle nose pliers and a hammer to re-close the link. The vice grips just help stabilize things and save fingers.
Tips: Some people have breakage issues with cleats. Cleats, like tire chains, need to be mounted correctly. If there is a kink or a twist in a link of chain, it will most likely break. So when you put these on, look -- or have a hiking partner look -- to ensure there are no kinks or twists.
I'm sure removing links will end the warranty, but hiking with snowballs could end my ankles. I figured it was worth it to get them to work.
Happy Hiking!
Seemed fine, too small though
Shopper✓ Verified Purchase•October 17, 2023
Could not get the L onto a pair of size 10.5 merrel moab 3's without much undue force. (Rubber was turning white color due to high
over stretching)
Returned for XL
over stretching)
Returned for XL
Works well on dirt too!
AKM✓ Verified Purchase•October 12, 2023
Bought these for field work in a local state forest. These make a huge difference when it comes to hiking steep ridges covered in leaves. No slips! Only thing I don't like it that they bend the toe back on my boot a little when they are on. I'm a size 10 and bought the size L according to the size chart so they apparently run a little small.
Missing Velcro straps
Amazon Customer✓ Verified Purchase•August 27, 2023
Excellent customer service. They quickly offered a refund due to the defective order, and I plan to re-order the same item, since the quality of rubber and spikes seems quite good.
----------------------------------------
Original Review :
The Velcro straps were not included in my package. As a result, the crampons slip off in muddy conditions, making them unusable. Otherwise, the quality seems to be fairly good.
----------------------------------------
Original Review :
The Velcro straps were not included in my package. As a result, the crampons slip off in muddy conditions, making them unusable. Otherwise, the quality seems to be fairly good.
Snug fit - runs small
Sports girl✓ Verified Purchase•August 25, 2023
After searching through the reviews. I wear a size 8 in women's and so I went with a size large for these chains. At first, I didn't look like they were gonna fit, but the silicone stretches enough to where It covers my boot. It is a bit snug to get on but once it's on, it seems to hold snug. And I did receive two left versions in my bag, but it doesn't make a difference when putting it on the boot. I'm only leaving a four-star review because I have yet to take them out into the snow to see the durability.
Page 1 of 2
