Happybuy 5 Inch ACCU Lock Down Vise Precision Milling Vice 5 Inch Jaw Width Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice with 360 Degree Swiveling Base CNC Vise
Key features
- •High precision clamp vise with a jaw width of 5 inch (125 mm). Jaw opening: 5 inch (125 mm)
- •Accu-lock clamp vise height: 5-1/2 inch (140 mm). Jaw height: 1-3/5 inch (40 mm)
- •Swiveling vise features with perfectly aligned precision jaw, acme screws and precise 360-degree scale
- •This bench clamp adopts high quality ductile iron 80000 PSI to achieve minimum bending. Maximum clamping force of 24 KN
- •The precision milling drilling vise is suitable for milling, drilling machine and precision parts finishing. Very accurate and durable
Happybuy 5 Inch ACCU Lock Down Vise Precision Milling Vice 5 Inch Jaw Width Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice with 360 Degree Swiveling Base CNC Vise
List Price: $191.62$172.46DEALYou Save: $19.16 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
40%
4★
60%
3★
0%
2★
0%
1★
0%
Was a very good purchase. The seller was great, followed up and asked for my review of the product
Mark Novak✓ Verified Purchase•October 4, 2023
I did a lot of research and looking around before I settled on this particular vise. I put a lot of credit into the reviews that others wrote about their experience with all the vises that I looked at, with this vise having the most favorable reviews. With that said I received exactly what I expected, It has great down force, a good finish and operates smoothly. I knew from others reviews that the corners would be sharp and needed to be stoned and there might be some casting voids. There were a couple underneath that were not a cause for concern. The other thing I expected and it makes no sense as to why the mfg of the vise would do this, is a raised pad where the indicator mark should be for the degrees of rotation. No mark and the pad is raised 1/8" of the surface of the degrees marks. even if the mark would have been there it would have basically been useless as the surface was to high to get a good read. This surface needs to be lowered and a indicator mark added. Other than that a great vise.
Nice vice for the money
Hanson Electric✓ Verified Purchase•September 12, 2023
I like the vice, so far I have only used it on my drill press. It seems to be well made, good fit and finish on the vice. But I am disappointed with the handle - very rough casting - no finish work. Took me a few hours to clean it up.
Keep in mind this vice is heavy and large. I use it on a 20-inch drill press. Might be too large for a smaller drill press.
Keep in mind this vice is heavy and large. I use it on a 20-inch drill press. Might be too large for a smaller drill press.
Inexpensive milling vice
Amazon Customer✓ Verified Purchase•September 11, 2023
Nice little vice for my mill. How did I ever get along without it?
Absolutely monstrous.
Nick✓ Verified Purchase•August 26, 2023
Bought the swivel 6" for a Tormach 1100M.
Almost 8.5" throat with jaws removed. 7" with included jaws. Couple thou lift with jaws installed. Close to none with jaws removed.
It's way, way too big, but I'm probably keeping it for the odd large job AND for the swiveling base.
Like everyone else says, the edges are razor sharp. I immediately bled 10 minutes into owning this. Edges need knocked down.
These photos show it next to a Tormach-branded 5" vise. This thing makes the Tormach vise look like a baby. Looking at the dimensions in this ad, I think even the 5" is bigger. It appears the 4" would be a comparable product, idk.
Almost 8.5" throat with jaws removed. 7" with included jaws. Couple thou lift with jaws installed. Close to none with jaws removed.
It's way, way too big, but I'm probably keeping it for the odd large job AND for the swiveling base.
Like everyone else says, the edges are razor sharp. I immediately bled 10 minutes into owning this. Edges need knocked down.
These photos show it next to a Tormach-branded 5" vise. This thing makes the Tormach vise look like a baby. Looking at the dimensions in this ad, I think even the 5" is bigger. It appears the 4" would be a comparable product, idk.
Not disappointed for the price.
Steve W.✓ Verified Purchase•August 20, 2023
1) the 4" is a good size for my Jet jmd-18 mill.
2) castings are rough, but the machined surfaces are adequate. It holds evenly across the jaws. The lead screw is smooth, and the jaws don't have a lot of slop in them.
3) the swivel is draggy and clunky, but I suspect non-chinesium fasteners will help with that.
2) castings are rough, but the machined surfaces are adequate. It holds evenly across the jaws. The lead screw is smooth, and the jaws don't have a lot of slop in them.
3) the swivel is draggy and clunky, but I suspect non-chinesium fasteners will help with that.
Page 1 of 2
