Bench Vise with Clamp Post Universal 3 Inch Bench Clamps 360° Swivel Base Home Vise for Holding Irregular Objects Table Vice with Longer Clamping Distance for Woodworking, Drilling, etc.
Key features
- •【New Upgrade】While retaining the basic functions of the traditional vise, our bench vises have added 10 screw holes and 4 clamping columns at the jaw. The column body has radian, and the distance can be adjusted by inserting different screw holes, so that irregular objects of different shapes and sizes can be firmly fixed.
- •【High Quality Casting】Our vises are made of high-grade cast steel, and the surface is sprayed, which is corrosion-resistant and more comfortable. The jaw is hardened and hammered to increase its hardness and strength, providing long-term durability and reliable grip.
- •【Universal Bench Vice】Maximum opening of jaw is up to 2.9 inch(74mm), jaw width 3 inch(75mm). Base clamping range increased to 4 inch(103mm), suitable for workbenches of various thicknesses.It can not only fix regular objects such as wooden strips, but also fix irregular objects such as walnuts.
- •【Wide Applications】Ideal for home, workshop, factory and professional use, providing clamping, crimping and rolling function for light applications, such as cutting conduit, drilling, gluing, woodworking, metalworking, sawing and so on, also suitable for precision work such as rivets, watches, jewelry, etc.
- •【Easy to Use】The oval swivel base is designed to be installed on or removed from various worktables conveniently and quickly, and the attached cushion makes it not hurt the table top. The distance can be easily controlled by rotating the bolt. The jaw with anti-skid pattern increases the grip and can fix the material firmly. Build in 360° swivel base, perfect for a wide range of clamping angles, saving your time and energy!
Bench Vise with Clamp Post Universal 3 Inch Bench Clamps 360° Swivel Base Home Vise for Holding Irregular Objects Table Vice with Longer Clamping Distance for Woodworking, Drilling, etc.
List Price: $52.36$47.12DEALYou Save: $5.24 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
50%
4★
50%
3★
0%
2★
0%
1★
0%
Wind chimes project
Amazon Customer✓ Verified Purchase•September 25, 2023
We bought this for husband to make wind chimes. Although the hobby did not last the clamp did
Nice value for the money, but see note below
Bill Reid✓ Verified Purchase•September 21, 2023
This is a light duty bench clamp that I use for modeling. There are several complaints by other reviewers concerning the main jaws not aligning properly, but this is easily overcome because the jaws are actually adjustable to the degree necessary for good alignment. Here's what you do: First, loosen the 4 philips head screws that hold the jaws in place, two on each jaw. Just loosen a few turns and do not remove them. Second, looking down on the center of the jaws, notice that there is a triangular alignment hole. Put a bolt slightly larger in diameter into this hole and tighten the clamp down on it. This will bring the jaws into proper alignment. Third, now firmly retighten the 4 philips head screws to maintain proper alignment. Back off a bit on the jaws and remove the alignment bolt. You're done.
Is too small for most needs
Kristy League✓ Verified Purchase•September 18, 2023
Got it specifically to hold chainsaw bar for sharpening & wish I'd gotten one bit larger/deeper. Otherwise it's made well & very versatile.
Awesome
Natalie L. Hance✓ Verified Purchase•September 14, 2023
I like that I can relocate it. It holds my item tight
Great little vise - not heavy duty!
Dave6557✓ Verified Purchase•September 13, 2023
This is a great little vise if you need a light duty vise from time to time. It can be quickly attached and removed from a work bench as thick as 3.5 inches or so. I use it for holding turning blanks while I mark centers, holding scraper blades for sharpening and small tools for repairs.
The jaws can be easily aligned using the two phillips-head screws that hold each jaw in the vise. Loosen the screws, close the vise with the jaws aligned, and tighten the screws again. The jaw faces have aggressive tooling - you'll want a set of jaw caps to use for almost anything. I've had good luck with FRICTIONWORKS Premium 4" Vise Soft Jaws. Anything you buy will be oversized, but these have strong magnets to hold them on the vise.
The "clamping posts" are useful. I've used them to bend wire for hooks as well as for holding odd shaped items. The swivel ability is also good.
One thing to note: they put what looks like a flat "anvil" area behind the rear jaw. Don't be tempted to use it! The back of the rear jaw is hollow and the top of the casting is barely 3mm thick. If you have the vise open at all there'll be no support under the rear jaw. I'm pretty sure any strike would shatter the casting.
Like the title says, this isn't a heavy duty tool, but it can meet a lot of needs in your shop.
The jaws can be easily aligned using the two phillips-head screws that hold each jaw in the vise. Loosen the screws, close the vise with the jaws aligned, and tighten the screws again. The jaw faces have aggressive tooling - you'll want a set of jaw caps to use for almost anything. I've had good luck with FRICTIONWORKS Premium 4" Vise Soft Jaws. Anything you buy will be oversized, but these have strong magnets to hold them on the vise.
The "clamping posts" are useful. I've used them to bend wire for hooks as well as for holding odd shaped items. The swivel ability is also good.
One thing to note: they put what looks like a flat "anvil" area behind the rear jaw. Don't be tempted to use it! The back of the rear jaw is hollow and the top of the casting is barely 3mm thick. If you have the vise open at all there'll be no support under the rear jaw. I'm pretty sure any strike would shatter the casting.
Like the title says, this isn't a heavy duty tool, but it can meet a lot of needs in your shop.
Page 1 of 2
