I am so happy I bought this brand of epoxy. I had it shipped to Arizona and had someone do the pours for me there. The results were fantastic and I must say, much different from the first brand of epoxy I tried. I don't know if it has to do with the different temperatures or the epoxy brand, but bubbles were almost non existent with this. A hair dryer for bubbles, but honestly didn't really see any. At home (seattle) with a different brand, I literally see the bubbles flying and shooting off of the epoxied table. The work was done very fast with this product and we did experience heat in the cups. I made sure we got the pour on to the table as fast as possible. Set time seemed much quicker than the product I have been using. I would buy this brand again, and it will be interesting to see how it acts in the cooler climate here in Seattle. We poured 2 countertops, 1 outdoor table top, 1 less than 1 foot glasstable top, a 4 x 4 table top and repaired a chair with this. I have enough left to maybe pour another small table, or to flood coat something. The outdoor top was poured onto 1/4 inch pressed board and is an insert to a table that we made after breaking the tile that was in the table top. It seems like it will hold up. My concern is that it might bow but we will see. I don't plan to do any flood coats. the first picture with pink counter tops is before. the last video shows a faucet that sprung a leak and you can see the water shooting out the side. I repaired the faucet using this same epoxy, I coated it both inside and outside with a thin layer. Of course it is a temporary fix, as the manufacturer is sending a new head but this is holding in the meantime. Also the mexican chair was falling apart. I used epoxy to glue all the wood slats to the bottom of the chair. (they were previously tied and mudded). This fix will last longer than the halflife of plutonium. I used hardboard packing material to catch the drips on these countertops. I don't throw packing materials away, I store them until I find a use for them. These long packing pieces originally came with headboards.

Yes i am beginner using epoxy resin. I actually used MAS Deep pour for voids (holes) and Table top for general pour.Using MAS was pretty easy, however you must Read the instructions a couple of times. Before you apply ,pick your time when the temperature is ideal to pour as per the instructions is critical.

Bought a cabin with 20 year-old tile counter tops in kitchen. Did not mind the tile but grout was worn down, old, very dirty and tiles were uneven in some places. Grout was just gross and difficult to clean counter tops. Decided to try MAS epoxy and wow, it changed my life in this kitchen. Now I have a smooth, hygienic surface that's easy to clean and looks great. So happy with results and love my kitchen now. Would definitely recommend this product.

Things to keep in mind:
It is very shiny/glossy so took a little getting used to but now we love it.
If doing the backsplash as well as counter tops, do backsplash first because of the vertical surface and drips.
The product is fairly easy to use and come with good instructions but helps if you do your research, watch some
videos for application tips, and plan it out with checklists. We did and did not have much difficulty.
If doing a large area, plan on doing multiple mix/pours as it's easier to work with small batches. Make sure you have
enough plastic containers/mixing tools/brushes. The dollar store is your great for disposable plastic containers and
brushes.
Break up areas if you can. After doing the first pour on small area to left of stove, it helped us estimate 5-6
more pours for remaining project and we ended up ordering more epoxy.
Cover cabinets and floors with plastic. You will have lots of drips over edges.
Do not use if you notice any hardening (you'll feel the heat) of epoxy in the container. That happened with one of our
mixes and it just made a mess and was unusable. We just started up another batch when that happened.
Do not do this without a heat gun. We were amazed at how well it got out the bubbles. And quickly too.

I have purchased this many times. It is easy to use, has a decent amount of working time. I haven't had any issues with yellowing so far. Although my oldest pieces are 3 years old.

It just seemed to me, having used dozens of different epoxies in different applications, that this epoxy dries and cures a bit slow for my taste. Even a full 24 hours after the product is poured and pushed into voids in the wood, it remains a bit more rubbery when sanded. I know that's partially due to the heat created by sanding, but it seemed more than that as a craftsman. I still have ½ of the product left for other projects, so I'll update after i use it again. Ultimately, it did work.