Perfect at work for all those oh look a different hidden bolt ECT...

I install shelving in the construction field, and this little thing has gone from cutting zip ties to pulling nails out of a wall. Unlike most multi tools, the phillips screwdriver on this baby is absolutely great...It is almost like they took an actual replaceable phillips bit and worked it in...it grabs and holds the screws like a good screwdriver should. I will be purchacing a few of these for friends at work. GREAT stocking stuffer for the handyman in your house!

This thing is fantastic! Im a handyman,and this covers the basics of what i need when i dont have my toolbox. If u have to pick just 1 tool to keep on your person....this is it. Its tough,everything works , ive already bought 4,to pass out to friends

I like to try to cram lots of tools into a relatively small toolbox but I don't like sacrificing quality or usability. This thing replaced the knife I used to keep in my toolbox, but adds a respectable adjustable crescent wrench (which I was missing before), a rather nice pair of pliers (all I had before was the needle nose pliers on my Gerber DIME), as well as some screwdrivers I that probably won't see much use. Definitely a big improvement.

Those of you who want to carry this around instead of keep it in a toolbox will probably want to use the screwdriver, and I wasn't totally clear on how that worked when I bought it, so"¦ first off, the bits slip into a storage compartment on the back of the included case/holster, while the tool itself goes in the front. The case can then be attached to a belt via a piece of heavy-duty cloth with velcro.

The Phillips head screwdriver tapers into a square shaft, and there is an adapter that slips over the screwdriver onto the square portion. The other end of the adapter is a standard ¼" hex socket, so it can take standard bits, which is a great feature. There are 3 hex bits (H6, H4, H3) 3 flat-heads (7, 5, 3), and 3 Phillips (PH2, PH1, PH0). The included bits seem pretty mediocre, but they're probably fine for a tool like this"¦ if you need better bits you can always pick up some impact rated ones.

The flat-head screwdriver seems to be of decent quality. Unlike the Phillips, there is no square shaft; the whole thing is just a long blade. You should be able to safely apply a decent amount of torque, but it certainly doesn't qualify as heavy-duty.

The knife is okay; I wouldn't want to use it to pry anything, but it's sharp and pretty sturdy. It does have a lock which seems pretty robust, so you shouldn't have to worry about slicing you hand in half.

The tools I'm most excited about, the pliers and the wrench, seem to be very good. The shape of the tool is great for both of them (i.e., fairly ergonomic), so you can apply a fair amount of torque without hurting your hand.

The pliers are about 9mm wide so you can get a pretty good grip. The locking switch is a bit too easy to accidentally flip for my taste, but if the pliers do pop open it's hardly the end of the world"¦ I'm much happier they put the good lock on the knife not the pliers :)

The wrench is 9mm wide at the base, and tapers to about 6mm at the tip. The adjustment mechanism is pretty solid and there isn't a lot of play... maybe around ½ to ⅔ mm, which is perfectly usable.

In addition to the belt loop on the case, there is a belt clip on the tool itself. I don't intend to keep it on me so I removed it (it's secured by a pair of Torx T5 screws) to give it a slightly more compact profile, but it seemed pretty solid and I would have no hesitation about keeping it clipped to me were I so inclined.

Going back to the screwdrivers, I do feel they missed an opportunity"¦ the square base is just a bit smaller than a ¼ square socket; it would have been nice to be able to throw ¼" drive sockets on there, though to be fair I don't see myself using that much in practice, and I'm not absolutely certain it would have worked (the Phillips head portion may need to be a bit shorter), though a ¼" square to ¼" hex adapter instead of the proprietary one they included would fix that.

Bottom line, the quality is good. Not great, but it's solid, and more than worth the $24 I paid for it. Much more importantly, it's also well worth the space in my toolbox. I expect it to live in my toolbox for the foreseeable future, and for something like this that's probably about the highest praise I can give.

The jaws of the adjustable wrench end are really flimsy and have a lot of play. I took it apart and added a washer next to the thumb screw. (Had to file down the washer quite a bit so it didn't interfere with the jaw teeth.) As long as I don't overextend the jaw, it now works great.
The blade is super cheap, as to be expected at this price, but good enough for opening packages, cutting cord, etc.. I didn't get it for the knife, anyway. And the blade has a frame lock.
The bits that come with it are a nice addition, but again, soft metal and won't last. Bits are easy to replace, though, so not a big deal.
The pliers don't open very wide, but for most uses, it'll be sufficient.
All in all, I just really like the versatility of this tool.