Well made. When you don't have any way to get a wire to a light to turn it on or off this is your answer. Easy to install. Highly recommended.

In my upstairs guest bathroom, the door opens immediately toward the shower, so obviously they couldn't put a light switch there! Which meant we had to open the door and walk around the door/toilet to get to the light switch. So this kit looked like just the trick. The receiver fit well inside the light base, and we used a command strip to attach the remote to the tile, right where one might expect the light switch to be. Installation was really easy with the included Wago-style electrical connector!

One thing is, since we do already have a switch, if you accidentally turn the "hard" switch off and back on again the light just stays off (on would have been better). So we just got a cover for the switch. It's probably better this way to prevent confusion to our guests.

This is a great, easy way to add or relocate an existing switch. The range is excellent: my transmitter (the switch) is about 60' from the receiver (the part that wired into the junction box) in a covered outdoor location and response to the switch is 100% and instantaneous.

I opened the transmitter up to note the battery type before installation. It is a CR 2032 "watch style" battery (included). I was impressed by the layer of silicone waterproofing inside the transmitter, a testament to their claim of water resistance. However, do note that replacing the battery requires opening the transmitter with a small screwdriver while trying not to break tiny and seemingly delicate tabs that hold the case closed. The transmitter is designed to stick on a wall with double faced tape and to replace the battery would require removing the transmitter from the wall and replacing with new double faced tape. Hopefully the battery will last for months so this won't become a frequent annoyance. It is a shame they didn't design this unit to fit a standard junction box with a Decora-style electrical trim plate; that would make for an easy and ideal installation with what is called an "old work" electrical junction box; such an installation would require a hole in the wall, but it would require no wiring inside the wall and would end up looking exactly the same as any other wall switch.

The instructions are actually not as bad as some reviewers have stated, but what is confusing is the fact that they have used their own color coding for the wires. Red in their case is line (hot, which is black in US standards), Brown is load (again this would be black in the US), and the unit has a confusing two blue wires that represent neutral (white in the US). In the US we would customarily see only one neutral wire coming out of the device as neutral is normally not switch but instead passed through in the junction box, bypassing the switch entirely. This begs the question: does one need to separate a neutral in and neutral out for this switch, or can both neutrals simply be connected to the neutral bus in the junction box? I tested simply connecting both neutrals to the neutral bus, as is standard in the US, and the unit worked fine so the neutral is not for some reason switched inside the receiver, they are simply two leads connected to the same common neutral. I hope this info makes installation clearer for those who understand what I am talking about.

Finally, I never tried using the supplied wire connectors; they appear inferior as many other reviewers have noted and likely not up to code as well. I used traditional wire nuts, worth a couple cents extra for peace of mind.

Aside from instructions that are only fairly good, and confusing wiring protocol, and aside from a form factor that almost matches other switches but simply doesn't, this is a great product that works well and appears to have very good weather proofing. I cannot speak to durability over time as I have just installed mine today, but as of this moment I am thrilled with the ease of use, the price, the quality and of course the convenience it adds for my purpose.

Wish I would've knew about these before I wired up the other switches in my house

The media could not be loaded. Three ago I had the opportunity to try out the Thinkbee 3 Way Wireless Switch and Receiver Kit, and I must say, it's been a game changer for my home's lighting control. This kit, consisting of two switches and one receiver, offers a hassle-free and innovative solution for anyone looking to upgrade their lighting system without the need for complex wiring or Wi-Fi connectivity.
The most remarkable feature of the Thinkbee 3 Way Wireless Switch Kit is its no-wiring design. I was able to install it effortlessly in a matter of minutes. The switches use a simple push-button mechanism, which means no need for professional electricians or extensive DIY skills.
This kit is a true dual control solution, allowing you to control your lights from two separate locations. This is perfect for hallways, staircases, or any room where having two points of control can be incredibly handy. No more fumbling around in the dark to find the right switch!
The wireless panel switches are sleek, modern, and blend seamlessly with any home decor. They are not only functional but also add a touch of elegance to your living space. You can mount them on any wall surface, and there's no need for complicated wiring work.
Unlike many smart lighting solutions that rely on Wi-Fi, the Thinkbee kit operates on its proprietary RF (Radio Frequency) technology. This means no interference with your home network, no need for additional hubs, and no risk of connectivity issues. It's reliable and straightforward.
I was pleased to find that the switches and the receiver are waterproof, making them suitable for both indoor and outdoor use. The robust construction ensures they can withstand the elements and still function flawlessly.
The Thinkbee kit is not just about convenience; it's also an eco-friendly choice. By eliminating the need for excessive wiring, you reduce energy consumption and minimize your carbon footprint.
The Thinkbee 3 Way Wireless Switch and Receiver Kit has transformed the way I control lighting in my home. It's not only convenient and efficient but also aesthetically pleasing. Whether you're looking to improve the functionality of your lighting system, save on installation costs, or just add a touch of modernity to your home, this kit is an excellent choice. It's a cost-effective and user-friendly solution for all your lighting control needs. I highly recommend it to anyone seeking a wireless, dual-control, and no-wiring lighting solution.