Landworks Mini Wood Chipper Shredder Mulcher Industrial Replacement Blade/Knives Set (Qty 2) for Both LCE12 SuperHandy and GUO054 Model Wood Chippers
Key features
- •DETAILED SPECIFICATIONS - Our Wood Chipper Blades are designed for the Landworks or SuperHandy Mini Steel Wood Chipper. The blades have a dimension of 4.15"L (105.4mm)(or 4-5/32) x 1.33"W (33.7mm) (or 1-21/64) x 0.18"H (4.5mm) (or 3/16). Each blade weighs 0.22lbs / 3.6 ounces. These blades have a Center-to-Center (Outer Holes) length of 3.16" & a Center-to-Center (Inner to Outer Hole) length of 1.55", with an Inner bolt diameter of Ø8.7mm & Outer bolt edge is Ø12.3mm.
- •EFFICIENT RESILIENT DESIGN - These Chipper blades are precision manufactured to be mounted with (3) bolts holding each blade into place (*Note: the bolts are not flat but slanted at 10.9 degrees). We chose a very strong & long-lasting CR12Mov Steel material for our blades, providing excellent longevity of use. Our blade edges sit at a 40 degree, for optimal chipping capability.
- •LANDWORKS - The Prime Outdoor Choice - Partner with us & join millions worldwide who empower their everyday lives, by using our cutting edge equipment & supreme advanced technology, to Conquer any task or obstacle. Arise & gain Dominance over your 'sphere of influence' by starting here.
- •COMMITMENT - GreatCircleUSA is the only authorized seller of Landworks products & we are committed to providing customers with a stress-free shopping experience. Buy with confidence, we are ALWAYS here to help.
BrandLandworks
Landworks Mini Wood Chipper Shredder Mulcher Industrial Replacement Blade/Knives Set (Qty 2) for Both LCE12 SuperHandy and GUO054 Model Wood Chippers
List Price: $52.36$47.12DEALYou Save: $5.24 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
40%
4★
60%
3★
0%
2★
0%
1★
0%
Chip off the ol' block
Dipole✓ Verified Purchase•August 28, 2023
I actually used these to replace hard to find knives on a different machine than intended so i can't speak to the fit. However, they were quite sharp, well packed and rust free when I received them. I tore through a decent amount of wood and they are still sharp. My only complaint would be that I wish they were a little thicker steel. Perhaps they need to be as originally designed, but they just seem a tad thin to me.
All in all, a good buy!
All in all, a good buy!
Sharp
Irene✓ Verified Purchase•July 17, 2023
Sharp blades. Last a long time. Pain to change blades on chipper
Get an extra set, they dull fast.
A. F. Richards✓ Verified Purchase•July 12, 2023
Good replacements but dull quickly.
Easy to install
Charmaine✓ Verified Purchase•July 11, 2023
We bought a chipper shredder in the fall. Hubby used it until the snow prevented him from doing more. This spring, he used the chipper for a couple days off very heavy use. Noticed the blades were getting dull.
Ordered these new blades. He installed them in less than 20 minutes and he was back to chipping in no time.
Would highly recommend for anyone who has the super handy chipper shredder.
Ordered these new blades. He installed them in less than 20 minutes and he was back to chipping in no time.
Would highly recommend for anyone who has the super handy chipper shredder.
THESE BLADES MOST DRFINATELY DO NOT FIT THE DEX BRUS HMASTER CHIPPER
Dragonheart✓ Verified Purchase•July 9, 2023
Reading the reviews one reviewer stated when asked if these blade would fit the Dex Brush Master Chipper. Instead of a definite NO! the reply was they needed modification. To me an accepted modification would entail a slight enlargement in the hole size to accommodate a larger size screw.. As an Industrial Engineer I can tell you only one hole out of the three could be lined up, necessitating recutting and enlarging the other two holes into an oval, which if fool enough to try would leave a severely weakened and poorly secured blade, highly likely to fracture sending pieces of hardened metal out of the machine at high velocity. To my knowledge all the Brush Master Chippers use the same blade, so the answer to this question is these blades absolutory DO NOT FIT the DEX Brush Master Chippers.
Page 1 of 2
