LED Balloons,10 Pack Light Up Balloons 24 Inches Transparent Helium Glow Bobo Bubble Balloons with String Lights for Valentines Day Halloween Christmas Wedding Birthday Party Decoration
Key features
- •💖💖High Quality Led Balloon💖💖---Transparent large bobo balloon, made of environmentally friendly TPU, no odor, durable, recyclable, not easy to rupture. Our balloons have passed EN71 Quality Certification, they are safe and reliable. To inflate the balloon to its maximum (18 inches), YOU MUST USE SOME INFLATABLE TOOLS SUCH AS A PUMP OR A HELIUM TANK. THE BALLOON CANNOT BLOW UP WITH YOUR MOUTH!!!
- •🧡🧡Magic Glowing Decoration🧡🧡---Our glowing balloons can be inflated for approximately up to 18 inches and keep the air up to 7 days without leakage. The light string box comes with switch and you can turn the light off and on at any time.
- •💚💚Easy to Use💚💚---To activate the LED Bubble balloons and glow in the dark party, fill the balloons with air or helium and put 2 batteries in the battery box (picture 6). Great for birthday, party, wedding, anniversary, pool party, dance club or any other special occasion worth celebrating.
- •💙💙Package Include💙💙---10 X LED String Lights, 10 X Bubble Balloons, 50 X Clear Seal Stickers. Note: Only floating by full of Helium. Don't near by fire while floating.
- •💜💜No Risk Purchase💜💜---We have 60-day money back and 12-month replacement warranty for all customers. If the Bobo light up Balloons don't meet your need or any defect, please contact us and customer care team will response you within 24 hours.
LED Balloons,10 Pack Light Up Balloons 24 Inches Transparent Helium Glow Bobo Bubble Balloons with String Lights for Valentines Day Halloween Christmas Wedding Birthday Party Decoration
List Price: $21.32$19.19DEALYou Save: $2.13 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.4
out of 5
Based on 10 reviews
5★
50%
4★
50%
3★
0%
2★
0%
1★
0%
These turned out great!
Christina Parker✓ Verified Purchase•December 14, 2023
I love these balloons! They look small when they arrive, but if you use an air compressor or helium tank to inflate as instructed, they expand to the correct size, 18 inches. The material is plastic, not rubber or mylar like traditional balloons and they are strong. I used air, not helium and bought balloon sticks to affix them to and was able to inflate and set up the night before. They lost a little bit of air overnight, but it wasn't very noticeable. The lights are fantastic and easy to wrap around the balloons, you don't have to be too careful about placement, I just wrapped once around and then once around in the opposite direction so they crossed perpendicular. The lights reflect all over the balloon so it looks like there are more than what is on the strand. They were a big hit!
Beautiful
Nisha✓ Verified Purchase•December 1, 2023
They look beautiful at my private event
Buy it for the larger balloon size but it only has ON/OFF lighting mode
SZee✓ Verified Purchase•November 24, 2023
The media could not be loaded. I bought these Bobo balloons from two manufacturers to see if there's a difference... there is! The Zodight starting size is larger than the other manufacturer but it only has ON/OFF as a lighting mode (read the fine print!) whereas the other manufacturer has 3 modes (fast strobe; slow strobe; ON). It was easier to inflate the Zodight balloon to a larger size, but the best I could do was 14" (18" just doesn't sound credible).
Tips:
1) Buy more balloons than you need! You will invariably pop one or two during inflation to find the maximum size.
2) Don't forget to stretch the balloon in the X and Y direction (maximum effort... grunting is good). Inflate slowly with the helium tank to give it a chance to stretch under inflation. Tie the knot as close to the balloon as possible to keep the wire strands taut.
3) Take your time uncoiling the wire strands to avoid kinks. Smooth and straighten the wires with your thumb and forefinger. Check that the strand is operational (insert batteries)... I had one bad LED on a strand.
4) Wrap the starting end around the knot (I find two wraps are sufficient) and start winding the strand around your balloon (I use the balloon seam as a guide). Two more wraps around the knot and you can start the 2nd winding perpendicular to the 1st. You will only have enough wire for two windings if the balloon is large enough to float.
Finish up with three wraps. The balloon video is with the other manufacturer's controller on fast strobe.
It's likely that the wire stands will loosen over time from balloon shrinkage (helium leakage but also cooler ambient temp) and will require re-wrapping to keep it taut. Don't expect the balloon to stay floating for days... loose strands occur after 12 hrs and will stop floating by 36 hrs, but it should be solid for the first 6 hrs. Reusing balloons and strands is perfectly doable (the used balloons may be easier to inflate to a larger size!). Don't forget to turn off the helium tank hard nozzle... the nipple nozzle will leak slowly.
Tips:
1) Buy more balloons than you need! You will invariably pop one or two during inflation to find the maximum size.
2) Don't forget to stretch the balloon in the X and Y direction (maximum effort... grunting is good). Inflate slowly with the helium tank to give it a chance to stretch under inflation. Tie the knot as close to the balloon as possible to keep the wire strands taut.
3) Take your time uncoiling the wire strands to avoid kinks. Smooth and straighten the wires with your thumb and forefinger. Check that the strand is operational (insert batteries)... I had one bad LED on a strand.
4) Wrap the starting end around the knot (I find two wraps are sufficient) and start winding the strand around your balloon (I use the balloon seam as a guide). Two more wraps around the knot and you can start the 2nd winding perpendicular to the 1st. You will only have enough wire for two windings if the balloon is large enough to float.
Finish up with three wraps. The balloon video is with the other manufacturer's controller on fast strobe.
It's likely that the wire stands will loosen over time from balloon shrinkage (helium leakage but also cooler ambient temp) and will require re-wrapping to keep it taut. Don't expect the balloon to stay floating for days... loose strands occur after 12 hrs and will stop floating by 36 hrs, but it should be solid for the first 6 hrs. Reusing balloons and strands is perfectly doable (the used balloons may be easier to inflate to a larger size!). Don't forget to turn off the helium tank hard nozzle... the nipple nozzle will leak slowly.
Amazing price
Victoria✓ Verified Purchase•November 22, 2023
I haven't made them yet as it just arrived but super excited to see how they come out 😉 don't come with batteries but uses AA batteries....💯
They work it's cute just takes a bit of time & patience
T.String✓ Verified Purchase•November 15, 2023
I'm not the type of person to write reviews at all but reading through others helped me get the balloons to work.
The first time we tried we were frustrated and the balloon barely inflated.
After reading reviews I realized it was about stretching the balloon and figuring out a technique to hold on the small helium tank. Because the open is so large its difficult to keep it completely closed while also inflation but once you get it a few done it gets easier. The second then make sure you really stretch the ballon I was afraid of rip it but the one that were stretched well inflated more.
Use clear tape to keep the lights on.
They came out well and you can use the for other things if you want. We would have done more but we ran out of time before the party started and it started to get windy outside. It did take a bit of time to inflate and add the lights and they stayed inflation and floating for the duration of the party about 3 or 4 hours.
Once they start to loose inflation the lights don't fit as tightly. But I do plan on untying and using them again and figure out a way to inflate faster but that may require a better helium tank
The first time we tried we were frustrated and the balloon barely inflated.
After reading reviews I realized it was about stretching the balloon and figuring out a technique to hold on the small helium tank. Because the open is so large its difficult to keep it completely closed while also inflation but once you get it a few done it gets easier. The second then make sure you really stretch the ballon I was afraid of rip it but the one that were stretched well inflated more.
Use clear tape to keep the lights on.
They came out well and you can use the for other things if you want. We would have done more but we ran out of time before the party started and it started to get windy outside. It did take a bit of time to inflate and add the lights and they stayed inflation and floating for the duration of the party about 3 or 4 hours.
Once they start to loose inflation the lights don't fit as tightly. But I do plan on untying and using them again and figure out a way to inflate faster but that may require a better helium tank
Page 1 of 2
