This is a great product and contraption! Once you get used to a bidet you might not want to ever go back to TPs. You will however need a bit less TP.

Installation appears easy at first and may be so for those with some background in plumbing. If not, it will take a bit of courage and finesse to install. My first install ended up with some leakage and could not fix the problem initially. I wanted to call a plumber and that would have cost me about $150 extra for installing both in two bathrooms. I slept over it and thought about it and figured I could get this thing done without the help of a plumber. Only problem was leaks and difficult working space ie location of the pipes for connections. On my second attempt, I got it down to a droplet leak every five minutes or so. I almost said I could live with it. Slept over it and did it again, the following day BUT this time I used Rectorseal T Plus 2 Pipe Thread Sealant from Home Depot and pipe sealant tape (included in order). That did the trick and voila.

After that, installing the second bidet was a roughly 30 minute job since the work space and location of pipe joints wasn't that easy to get to and work with. Also having the right tools really helps. The plastic stuff included in the order don't work as well if any.
Can anyone install this Bidet? Yes,even without any background in plumbing. Just make sure you read and understand the instructions before you start. Make sure you know exactly where the hot water connection on both ends are located. I had connected the hot to the cold and had to redo it which took some time. Overall I learned a bit of plumbing, saved $150 in plumbing costs and now have an inexpensive bidet that can become addictive to use.

Get one and install it. BTW it takes a minute before the hot water reaches the contraption, so if your toilet is far from the hot water heater you may want to run the water in the sink before you go. Alternatively get used to the cold water, and if you can; than you will not need the hot and cold water version. If the hot water heater is near the bathroom you may just need to plug the hot water and leave the cold out. Once you install it, play with it until you learn the best way to enjoy the device. In hot areas of the country, there is no need for the hot water version. Thus for less than 30 bucks you could save tons on toilet paper. Enjoy the bidet!

I love this item so much I have 3 bathrooms I got 3

Its very flimsy as you have to pull up to wash the whole Bidet moves up. its not sturdy or strong.

I recently had surgery for which I purchased this item. The install took me about an hour as I was limited in my mobility. The kit included all the necessary parts and fittings to fit my particular plumbing. It was nice to have it all fit without a run to the hardware store. Installation was straight forward and the directions easy to read and follow. Anyone with some skill should be able to accomplish the job. However there are some things that are a discouragement. My toilet is an American Standard round bowl which the mounting tabs are at the very end of their adjustment. The frame mounting was not flat and had to be held flat with tension from the seat bolts. The water inlets are plastic so take care when threading the hoses into the fittings. Using the device is very straightforward and easy to understand. Turning on the hot water in a sink or somewhere close will get the warmth you want sooner rather than later. All in All ...it does it job at a reasonable price and does a good job of it. I would recommend it for the price range it is at.

Easy assembly. Fits flush with the toilet seat like nothing is there.