I bought this roof rack cargo for my wife's minivan, and I am very impressed with it. It is a large and sturdy cargo basket that can hold a lot of stuff. We've used it for a camping trip, and it fits our tents, sleeping bags, coolers, and other gear. The cargo basket is easy to install and secure on the crossbars, and it comes with a wind fairing that reduces the noise and drag. It is a great product for anyone who needs extra storage space on their vehicle.

The product looks nice, but didn't like the fact it came will silver screws, instead of black to match the rack. I went to a hardware store and purchased black screws and rubber washers to prevent water from leaking into the rails. The instructions also did not include instructions on mounting onto the roof. Thankfully I found videos online.

Overall a decent carrier. Fit a GMC Yukon well. Easy to put on vehicle but made of steel so best if two people set in place on roof. Would have considered paying a little more for aluminum frame. Powder coating finish is adequate but I am getting some rust stains on joint areas so would not recommend leaving on vehicle for extended periods of time.

After reading reviews mentioning shipping damage, I gave mine a good inspection. Everything looked good...no bent tubes, no damage, components were packed really well. Mating parts slipped together quite easily, and nothing was misaligned. After a dry fit test, I disassembled and gave each slip-in part a dose of black silicone caulking before fitting together to minimize vibration and water intrusion from rain...this I'd strongly recommend. Just apply a generous amount of silicone (I put a large blob onto a piece of scrap wood and used a tongue depressor stick to "butter" the pieces) and wipe off the excess after fitting together. All screws and U-bolts are metric M6x1mm thread pitch. I replaced the included screws with 18-8 stainless steel screws with a black oxide coating so they'd blend in with the black rack (got them at McMaster-Carr); the tulip-looking nuts for the U-bolts will stick up above the floor of the rack, so I replaced them M6 nyloc locknuts. If the U-bolts protrude about the floor of the rack (mine did) you can cut off the excess with an angle grinder or a Dremel (see the last image). The rack came with a nice textured finish and required only minor touch-up, so I sprayed it with a coat of Herculiner. The only nit was the front fairing...I didn't like the fit (wouldn't sit flat) so I simply left it off. All in all, I was pretty surprised at the quality of the rack. It may not be a Yakima or a Thule, but it didn't cost as much as those either. I'm using the 50" x 64" model, which doesn't seem as large on the roof of my '95 4WD Suburban. No complaints whatsoever.

EDIT: As I mentioned, I replaced the flower-looking nuts with stainless steel M6 nyloc locknuts. I was able to find some protective covers on Amazon to cover the exposed threads of the U-bolts to minimize any corrosion. These can be seen in the last pic. Just need a sharp utility blade to cut the covers down to the proper length to cover the threads. Just search 'round rubber end caps' on Amazon and you'll find them.