4PCS ESP32-CAM Camera Module ESP32 CAM WiFi Bluetooth Development Board ESP32 Wireless OV2640 Camera Module with Jumper Wire
Key features
- •The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
- •ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
- •ESP32 cam using low-power dual-core 32-bit CPU, can be used as an application processor, main frequency up to 240MHz, computing power up to 600 DMIPS, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
- •Note: Please make sure that the input power of the module is at least 5V 2A, otherwise the picture may have water lines; The ESP32 GPIO32 pin controls the camera power. When the camera is working, please pull GPIO32 low; Since IO0 is connected to the camera XCLK, please leave IO0 in the air when using it, and do not connect it to high or low level
4PCS ESP32-CAM Camera Module ESP32 CAM WiFi Bluetooth Development Board ESP32 Wireless OV2640 Camera Module with Jumper Wire
List Price: $43.63$39.27DEALYou Save: $4.36 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 1 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Good to go, right out of the box.
Larry J.✓ Verified Purchase•May 20, 2023
These cameras work perfect. They are easy to test, right out of the box. They are already flashed with the generic, sketch, that will allow you to connect to it with your WiFi as is. You will recognize it right off the bat, and no preset password, just connect to it, search 192.168.4.1 and up will come control panel. Just click on start video or still picture, to view camera. Change resolution in top select box, and you can get higher resolution picture. All the default adjustments are there, to check what camera works best with. Is very handy to be able to test it right after you get it. Even the facial recognition is there. Everything worked great. PIR is not preset to any pin, so if you plan to use them also, you'll need to reflash them with your code. This is a very good deal, and price is great.
