REEKON M1 Caliber Measuring Tool for Miter Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials
Key features
- •A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen.
- •DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil.
- •COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe.
- •INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location.
- •QUICK AND EASY SETUP - Simply clamp to your saw fence, release the arm, input your blade thickness and you're ready to cut. Perfect for professionals, contractors, woodworkers and other tradespeople.
REEKON M1 Caliber Measuring Tool for Miter Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials
List Price: $218.24$196.42DEALYou Save: $21.82 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
80%
4★
20%
3★
0%
2★
0%
1★
0%
âï¸âï¸âï¸âï¸âï¸
Lauren✓ Verified Purchase•August 29, 2023
Great quality and a good gift! 10/10
Incredibly accurate!
Justabbygal ✓ Verified Purchase•August 8, 2023
I bought this almost a year ago and was nervous to even take it out. I wish I had WAY earlier. There are simple videos for calibration that only takes a moment.
For those saying that it's off by a small amount - I would venture to say they didn't finish the setup where you adjust for the loss when cutting, which literally takes less than a minute to do.
I needed several 6" cuts for my first project with this. I have included a photo of 1 of them"¦ 6" spot on. And they are ALL like that.
I am very pleased. If you weren't sure about this, get it! But PLEASE follow all of the instructions for the like 5 minutes of setup you need to do before complaining that it's not accurate lol
For those saying that it's off by a small amount - I would venture to say they didn't finish the setup where you adjust for the loss when cutting, which literally takes less than a minute to do.
I needed several 6" cuts for my first project with this. I have included a photo of 1 of them"¦ 6" spot on. And they are ALL like that.
I am very pleased. If you weren't sure about this, get it! But PLEASE follow all of the instructions for the like 5 minutes of setup you need to do before complaining that it's not accurate lol
Steep Learning Curve
OZ4✓ Verified Purchase•July 7, 2023
I do a lot of picture frames on my miter saw and using the Reekon M1 takes a lot of practice with the 45 degree cuts, inside and outside lengths and rabbits. For straight 90 degree cuts it very accurate once it is setup and calibrated.
Good
William✓ Verified Purchase•June 26, 2023
A little fiddly fit can get used to. Once set up properly, very accurate
Accurate and Fast
Name-Classified✓ Verified Purchase•June 23, 2023
Ok, so IF you try to mount this with a zero clearance fence; you will probably run into issues with the measuring wheel and arm mount.
You'd essentially need to use the actual fence to attach; the jaws do not provide clearance for anything more than under 3/4".
I snapped off one of the latching plastic pieces in an attempt to remove it; luckily I was able to exchange it for a new one. But be cautious; it does have some flimsy plastic parts for the jaws, just be aware.
Once you get past those parts and you get calibrated and lock in your blade width (DONT FORGET TO LOCK IN YOUR BLADE KERF WIDTH!!!), this thing works exactly as intended.
You can batch out long reams of material and for quick semi-rough work; you can get real productive real fast and be safe about it as well.
All in all; depending on how much your time is worth and how savvy you are with electronics and setup procedures...this is a great purchase.
You'd essentially need to use the actual fence to attach; the jaws do not provide clearance for anything more than under 3/4".
I snapped off one of the latching plastic pieces in an attempt to remove it; luckily I was able to exchange it for a new one. But be cautious; it does have some flimsy plastic parts for the jaws, just be aware.
Once you get past those parts and you get calibrated and lock in your blade width (DONT FORGET TO LOCK IN YOUR BLADE KERF WIDTH!!!), this thing works exactly as intended.
You can batch out long reams of material and for quick semi-rough work; you can get real productive real fast and be safe about it as well.
All in all; depending on how much your time is worth and how savvy you are with electronics and setup procedures...this is a great purchase.
Page 1 of 2
