Key features

• •[FITMENT]: The CARORAV tire pressure sensor fit for 2020-2021 Ford Bronco, 2018-2022 Ford EcoSport, 2015-2021 Ford Edge, 2020-2022 Ford Escape, 2020-2021 Ford E-Series, 2018-2021 Ford Expedition, 2016-2022 Ford Explorer, 2020 Ford Fiesta, 2018-2020 Lincoln MKC, 2016-2021 Lincoln MKX, 2017-2021 Lincoln MKZ ect.
• •[REPLACE PART NUMBER]: F2GZ1A189A, F2GT1A180AB, GL3T1A180GA, GL3Z1A189A, FR3Z1A189A, HC3Z1A189A, FR3T1A189A, FR3V1A180AA, HC3T1A180AB, HC3T1A150AA
• •[PRE-PROGRAMMED]: PRE-PROGRAMMED DO NOT mean the sensor will automatically match your vehicle, it need to require a re-learning/reset operation. And some re-learning/reset procedures may require a professional diagnostic scanner or activation tool
• •[ATTENTION]: STOP INSTALLATION if it has no response. Before installation, pls use tpms tool to scan the tpms sensor. If it can't be read or triggered correctly, DO NOT proceed with the sensor replacement installation
• •[HOW TO RELEARN]: OBDII RELEARN: 1.OBDII connector is required, 2.Confirm TPMS sensors are properly installed, 3.Adjust tire pressures to placard value, 4.Activate TPMS tool on left front tire sidewall next to the valve stem, 5.Repeat for Rf/RR/LR tires, 6.Apply OBD connector to DLC, 7.Tern ignition to ON, 8.Press OK on TPMS Tool to transfer date to ECU, 9.Disconnect OBD connector from DLC, 10.Turn ignition to OFF then start the engine, 11.Drive for at least 5 minutes at 28 mph
• •[VERIFY VEHICLE FITMENT]: 1.Check "amazon confirmed fit" at the top of the page to determine the compatibility of your vehicle, 2. Check the matching information related to "APPLICABLE MODELS" on the page, 3. Please feel free to contact us if you have any questions