Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology
Key features
- •Tone and trace wire on non-active networks. SmartToneTM technology provides five distinct tones for exact pair identification.
- •Sends a loud tone up to 16 km (10 miles) in most cables and provides five distinct cadences for isolating individual wire pairs
- •Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
- •Angled bed-of-nails clips allow easy access to individual pairs and RJ-11 easily connect to telephone jacks---no need for adapters
- •Attach nylon pouch (included in kit) to your belt for easy transport
- •Fluke Networks Pro3000 Analog Tone Generator
- •Fluke Networks Pro3000 Analog Probe
- •(2) Angled Bed-of-Nails Clips
- •(1) RJ11 Plug
- •Nylon carrying pouch
- •Instructions
BrandFluke Networks
CategoryNetwork & Cable Testers
SizeTone Generator and Probe (non Filtered)
Colornavy
WarrantyContact Manufacturer
Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology
List Price: $158.60$142.74DEALYou Save: $15.86 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (14)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
80%
4★
10%
3★
10%
2★
0%
1★
0%
Works great. I do hvacr
Dustin✓ Verified Purchase•March 11, 2018
Works great. I do hvacr. Had to trace A LOT of wires on a refrigeration system on a boat. Bought this to help out. Worked perfectly. All wires have to be dead (which they were) worked on larger high voltage wires, smaller cables. Only the shielded wires gave a little trouble as the tone SIGNIFICANTLY dies through a shield but that's understandable. Used it a lot and so far haven't had to change batteries on anything. I also plan on doing some rewiring on my house that I expect this will be handy to have.
Saves time like you wouldn't believe.
Chris✓ Verified Purchase•June 14, 2017
I used the tone generator to trace Ethernet lines to the basement of a 3 story house. I can only image how long it would have taken me to follow each individual wire. One of my favorite features is the ability to verify your on the right wire. all you have to do is take 2 wires that are connected to the toner and touch them together and the sound changes. I suggest having a set of two way radios and a helper. As awesome as this product is you still have to move the toner from room to room and depending on how big the job is that's a lot of running up and down the stairs.
The Standard
Lee✓ Verified Purchase•February 7, 2016
I love my Fluke Tone Generator. While targeted at the 'pro' segment, I use this all around my house while tracing the already installed cable and pulling new lines while setting up my home network. The signal is strong enough to locate from a short distance, helping at times find the lines either behind drywall, and under a few inches of blown insulation in the attic. However, there were a few instances where there were two lines in a single box, and I noticed some bleed-over in the signal, and I had to listen with a fairly discerning ear to differentiate between the two lines.
Having this tool also helped me diagnose a wiring issue in my home and come up with a solution to wiring my second story onto the network.
There are less expensive tone generators on the market, however I don't believe any of them to be as reliable, or as consistent as the Fluke.
Having this tool also helped me diagnose a wiring issue in my home and come up with a solution to wiring my second story onto the network.
There are less expensive tone generators on the market, however I don't believe any of them to be as reliable, or as consistent as the Fluke.
Excellent product
SaltineAmerican781✓ Verified Purchase•January 12, 2016
Best toner out there in my opinion. I use this on fire alarm systems and you can actually walk down a hallway and hold this above your head and trace out wires above the ceiling.
Exactly what I needed to finish my home project
Just Me✓ Verified Purchase•December 5, 2015
Works great for the use I intended it for. I converted the existing CAT-5e cable runs in my new house the original builder used for phones and put them over to network drops. I had a bundle of CAT-5e in the basement that wasn't labeled so I had to tone out all the drops in order to put them into a punch down patch panel. I used to have another fox and hound, but couldn't find it so I got this one. I'd definitely buy it again!
Page 1 of 2
