uxcell a15011600ux0213 5 Piece 1K Ohm Linear Taper Rotary Potentiometer, 1KB B1K Pot
Key features
- •Product Name : Potentiometer;Resistance Value : 1K ohm;Adjustment Type : Top Adjustment
- •Type : Single Linear (Type B);Features : Knurled Shaft;Shaft Diameter : 6mm / 0.2"
- •Shaft Length : 13mm / 0.51";Mounting Thread Diameter : 7mm / 0.3";Base Size : 16 x 7.3mm / 0.63" x 0.29"(D*H)
- •Knob Size : 15 x 17mm / 0.6" x 0.67"(D*H);Total Height : 31mm / 1.2";Material : Metal, Electronic Parts
- •Net Weight : 45g;Package : 5 x Potentiometer
Branduxcell
CategoryPotentiometers
uxcell a15011600ux0213 5 Piece 1K Ohm Linear Taper Rotary Potentiometer, 1KB B1K Pot
List Price: $17.19$15.47DEALYou Save: $1.72 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
40%
4★
60%
3★
0%
2★
0%
1★
0%
but the rest were great!
Jayden S.✓ Verified Purchase•July 22, 2023
One of them arrived broken, but the rest were great!
Fair
D Lacerda✓ Verified Purchase•June 10, 2023
Not quite precise. Some potentiometers had the full range value quite different from 10k, for example like 4k, 6k.
Works fine..
Amazon Customer✓ Verified Purchase•June 9, 2023
Works fine... after playing with it I should have gotten a pot with more resistance, but that is not the seller's fault.
Excellent Rotary Potentiometers
Bwade✓ Verified Purchase•June 8, 2023
These rotary potentiometers are excellent quality with a smooth dial operation. They work great for small electronic projects.
Worked great to modify Arcade1up volume
Raidy✓ Verified Purchase•June 2, 2023
The Mortal Kombat standup from Arcade1up (MK, MK2, UMK3) has much too high a volume output (even on low), so I needed something to allow me to fine tune the volume vs the low/high option.
This did the trick perfectly, just snip one of the speaker wires, solder the ends onto this dial, drill a small ~1/4" hole in the back of the plastic casing to mount the knob, and good to go on variable volume!
Of note, a couple of the units had slightly bent pins, doesnt look like anything that would affect the usage, but since I have only needed to use one of the five that came with it so far, I picked a pristine one from the lot.
Will update if anything changes after being in use for some time.
This did the trick perfectly, just snip one of the speaker wires, solder the ends onto this dial, drill a small ~1/4" hole in the back of the plastic casing to mount the knob, and good to go on variable volume!
Of note, a couple of the units had slightly bent pins, doesnt look like anything that would affect the usage, but since I have only needed to use one of the five that came with it so far, I picked a pristine one from the lot.
Will update if anything changes after being in use for some time.
Page 1 of 2
