KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)
![KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)](https://m.media-amazon.com/images/I/41Rk1BrMp9L._SL500_.jpg)
![KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)](https://m.media-amazon.com/images/I/41os6HtEuyL._SL500_.jpg)
![KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)](https://m.media-amazon.com/images/I/411CCKLwEFL._SL500_.jpg)
![KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)](https://m.media-amazon.com/images/I/41iYSeU8zlL._SL500_.jpg)
![KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)](https://m.media-amazon.com/images/I/41D1lL6D6YL._SL500_.jpg)
Key features
- •Aluminum Alloy Base
- •Cutting Thickness 0-0.6"
- •ETL NSF FDA Approved
- •420-Watts Motor Power
- •12" Premium Teflon Blade
KWS Commercial 420W Electric Meat Slicer 12" Frozen Meat Deli Slicer Restaurant and Home Use Stainless Steel Blade [ETL, NSF Certified] (Teflon Blade, 12-Inch Blade)
List Price: $973.40$876.06DEALYou Save: $97.34 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
60%
4★
40%
3★
0%
2★
0%
1★
0%
functional well built
chris stahler✓ Verified Purchase•October 27, 2023
The directions are poor but I understand. As a mechanical designer I at times must write instructions. Even with English being my language of birth, writing instructions is very difficult.
The unit is well designed and easy to clean, when you do it correctly. When removing the blade cover backoff the blade retainer screw part way. DO NOT COMPLETELY REMOVE IT Now give it a tap with your hand and the blade cover will push forward, now finish the removal of the retainer screw. Completely removing the screw before tapping it will damage the threads. Now remove the 3 machine screws that hold the blade on to the drive hub. BE SURE TO USE CUT RESISTANT GLOVES and pull the blade off the hub, it is heavy and will cut you if not for the gloves. Now the unit is easy to clean. Some have complained that the screws holding the blade were tight, to loosen an over tightened screw use impact instead of torque. I use a impact screw gun but a vice grip on a screw bit and a small hammer can achieve the same thing. I had a few screws loose in the box, one was for the clear hand guard the other so far does not have a home. After a few hours run time checking the screws for tightness would be a good idea.
The unit is well designed and easy to clean, when you do it correctly. When removing the blade cover backoff the blade retainer screw part way. DO NOT COMPLETELY REMOVE IT Now give it a tap with your hand and the blade cover will push forward, now finish the removal of the retainer screw. Completely removing the screw before tapping it will damage the threads. Now remove the 3 machine screws that hold the blade on to the drive hub. BE SURE TO USE CUT RESISTANT GLOVES and pull the blade off the hub, it is heavy and will cut you if not for the gloves. Now the unit is easy to clean. Some have complained that the screws holding the blade were tight, to loosen an over tightened screw use impact instead of torque. I use a impact screw gun but a vice grip on a screw bit and a small hammer can achieve the same thing. I had a few screws loose in the box, one was for the clear hand guard the other so far does not have a home. After a few hours run time checking the screws for tightness would be a good idea.
IF you plan on cutting cheese order one with a teflon blade
Allyn Reimann✓ Verified Purchase•October 19, 2023
Nice Slicer. This slicer is very heavy . For the money it seems pretty good. But if you want to cut cheese a teflon blade is what the manual tells you to use. The blade comes in stainless steel or teflon coated stainless steel. It was shipped by fedex and the first one was damaged to the point were it would not work. The second one you could tell was handled very rough too. I had to do a little straightening to make it work. Not impressed with fedex at all. KWS stood behind there slicer in replacement. No problem there.
Nice slicer but.....
djtcds✓ Verified Purchase•September 16, 2023
Likes: powerful; cut through block cheese, boneless ham and semi frozen sausage rolls with ease; pretty easy to disassemble and clean.
Dislikes: it is heavy but I wanted a 12 inch blade so I expected it; knob that adjusts slicing thickness drags on shaft making it a little hard to turn (may just need to lubricate the shaft); but my biggest pet peeve is the 3 screws holding the blade on, they're Phillips head screws and as hard as they are to get off easily stripped so I ordered some stainless steel countersunk machine bolts that use an Allen wrench instead. The bolts are #10/32x1/2 inch. I have installed them and they work great. **I installed 3/4 inch screws but 1/2 inch is what came out of it.
Dislikes: it is heavy but I wanted a 12 inch blade so I expected it; knob that adjusts slicing thickness drags on shaft making it a little hard to turn (may just need to lubricate the shaft); but my biggest pet peeve is the 3 screws holding the blade on, they're Phillips head screws and as hard as they are to get off easily stripped so I ordered some stainless steel countersunk machine bolts that use an Allen wrench instead. The bolts are #10/32x1/2 inch. I have installed them and they work great. **I installed 3/4 inch screws but 1/2 inch is what came out of it.
GREAT SLICER
Donnie✓ Verified Purchase•August 31, 2023
I spent 40 + yrs. as a meat cutter (butcher) . I have used many differant more expensive meat slicer than the KWS 420W meat slicer .I have sliced turkey and beef roast, including cheese, it sliced excelent, very happy ,great buy!
best slicer for home use. very very happy with purchase.
JohnBujalski✓ Verified Purchase•August 16, 2023
after reading reviews for many different machines, I decided on this one for the size of the tray and the wattage of the motor [at 420 watts it was the biggest one I could afford without breaking the bank] my daughter worked in a deli, she advised me to make the meat as could as possible without freezing it. did a 6lb pork roll, absolutely perfect. also did 2 slabs of home made bacon 5lb each accidently partially froze the first and noticed it wasn't cutting clean at the start of slice. froze the 2nd slab a little longer, about 3hrs and all perfect slices. we buy in bulk and process our own ham and bacon. this will make slicing for portion control so much easier very happy with this machine. also love the fact it came with spare parts, but manufacturer' website has all the parts you'll ever need.
Page 1 of 2
![KWS MS-10NS 320W Motor Electric Meat Slicer 10-Inch with 304 Stainless Steel Blade, Frozen Meat/Cheese/Food Slicer Low Noise Commercial and Home Use [ ETL, NSF Certified ]](https://m.media-amazon.com/images/I/41uleLilsjL._SL500_.jpg)
