Icon Pro Audio DAW Control Surface, QCon Pro X Main Unit (QCONPROX)
Key features
- •8 touch-sensitive motorized channel faders
- •12-segment LED channels level metering on metering bridge
- •1 touch-sensitive motorized fader for master channel
- •Stereo LED master channel level metering on metering bridge
- •Mackie control build-in for Cubase, Nuendo, Samplitude, Logic Pro, Abelton Live, Reaper, Reasons, Studio One and Bit wig
- •Includes free recording software, such as Harrison 32C Vocal Intensity Processor, a "greatest hits" collection of features from Harrison's analog console heritage, Harrison AVA plugins and Mixbus32C workstation; Tracktion DAW Essentials, a collection of 16 contemporary FX plugins for use with any DAW; Dotec Audio plugins for streaming, podcasting, recording and mixing; and Bitwig Studio 8-Track, the trim and effective digital audio workstation to start producing, performing, and designing sounds like a pro, all available via download upon purchase and registration
BrandIcon Pro Audio
SizeQCon Pro X Main Unit
Warranty1 year warranty against manufacturing and material defects.
Icon Pro Audio DAW Control Surface, QCon Pro X Main Unit (QCONPROX)
List Price: $1018.49$916.64DEALYou Save: $101.85 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.6
out of 5
Based on 3 reviews
5★
67%
4★
0%
3★
0%
2★
0%
1★
33%
Qcon pro X unit runs fine in Logic 9 and Pro tools 10
Tones Malones•January 26, 2018
Qcon pro X unit runs fine in Logic 9 and Pro tools 10. My main question I had was whether this product would handle Slate Plug-in products well (VMR,VCC etc) and it communicates just fine. This is an excellent product and I am happy to own one. Cant wait to add another 8 channels as expansion.
After a year of use, I can confidently say these are complete trash.
Jeff•September 9, 2017
====Updated Review====
After a year of use, I've gone from three stars to one star. I have a ProX and three ProXS extenders. They lose connection constantly. I hate them. This was an outrageous waste of money. Even the single ProX will not stay connected longer than 10 minutes. The ProX unit or one (or multiple) extenders will simply stop responding within 10 minutes or so. I have the power management settings set to not disconnect in the device manager. I've attached these units to multiple computers and paid careful attention to the device management settings. It's perfectly normal for the units to not be recognized at all by any computer they are connected to. There is no relief. So, we have gone from limited functionality by design (3 star review) to complete dysfunction (1 star review). The brand name iCON used to be respected. I now identify this brand as trash. I will be throwing these units away. I cannot in good conscience sell them to anyone as the buyer will eventually want their money back.
====Previous Review====
The chassis is sturdy metal and it looks great sitting on a desk. Unfortunately, the meter bridge does not work very well at all. The meters show values that are off by 15 or 20 db. They update extremely slowly, changing only a couple of times a second which will make active meters appear to just be flashing different values (and wrong values). Also, the master meter does not work in any of the programs I use (Reaper, ProTools and Studio One). I'm running the latest firmware (which was not easy to install), but the deeper I look, the more I find does not function.
The faders are OK, but you must touch them from the top or they will not work. They must sense your full finger touching them or they won't activate, which makes using the faders a bit distracting. The fader motors are solid and no longer have the jiggle issues they used to have in previous firmware versions.
iCon has upgraded its firmware regularly and seem to be addressing issues as quickly as they can, so I am giving them 3 stars. I really considered sending it back and leaving a bad review, but I'm gambling that they will get the big issues remaining fixed with future firmware versions. The meters are a huge part of this hardware and really need to be addressed. If you buy this thing in its current condition, you too will be gambling that they will make it functional in the future. As it stands right now, much of the device is just not useful. I'm crossing my fingers. I'm hoping these problems can be fixed with more firmware updates.
After a year of use, I've gone from three stars to one star. I have a ProX and three ProXS extenders. They lose connection constantly. I hate them. This was an outrageous waste of money. Even the single ProX will not stay connected longer than 10 minutes. The ProX unit or one (or multiple) extenders will simply stop responding within 10 minutes or so. I have the power management settings set to not disconnect in the device manager. I've attached these units to multiple computers and paid careful attention to the device management settings. It's perfectly normal for the units to not be recognized at all by any computer they are connected to. There is no relief. So, we have gone from limited functionality by design (3 star review) to complete dysfunction (1 star review). The brand name iCON used to be respected. I now identify this brand as trash. I will be throwing these units away. I cannot in good conscience sell them to anyone as the buyer will eventually want their money back.
====Previous Review====
The chassis is sturdy metal and it looks great sitting on a desk. Unfortunately, the meter bridge does not work very well at all. The meters show values that are off by 15 or 20 db. They update extremely slowly, changing only a couple of times a second which will make active meters appear to just be flashing different values (and wrong values). Also, the master meter does not work in any of the programs I use (Reaper, ProTools and Studio One). I'm running the latest firmware (which was not easy to install), but the deeper I look, the more I find does not function.
The faders are OK, but you must touch them from the top or they will not work. They must sense your full finger touching them or they won't activate, which makes using the faders a bit distracting. The fader motors are solid and no longer have the jiggle issues they used to have in previous firmware versions.
iCon has upgraded its firmware regularly and seem to be addressing issues as quickly as they can, so I am giving them 3 stars. I really considered sending it back and leaving a bad review, but I'm gambling that they will get the big issues remaining fixed with future firmware versions. The meters are a huge part of this hardware and really need to be addressed. If you buy this thing in its current condition, you too will be gambling that they will make it functional in the future. As it stands right now, much of the device is just not useful. I'm crossing my fingers. I'm hoping these problems can be fixed with more firmware updates.
Very Satisfied!
Amazon Customer•March 24, 2017
The best control surface out for the price!!!! Easy to use and everything works great with Logic Pro X and Studio One! Solid, smooth faders, solid buttons, accurate display and meter bridge.
