Zip Hinge - 2 Pack | 2-6 Pack Set Downspout Gutter Hinge - Fits 2x3, 3x4, 5 inch, 6 inch - Universal Fit - Made in The USA
Key features
- •CONVENIENT - Flip your gutter downspout extension up & out of the way when doing outdoor lawn activities - MOWING, EDGING/TRIMMING, LANDSCAPING, SHOVELING, PLOWING, ETC.
- •NO SKILLS REQUIRED - DIY 60 second install - PAINT to match gutter color - HARDWARE INCLUDED - Zip Screws & Clasp
- •UNIVERSAL FIT - Fits any size rectangular & square residential & commercial gutter systems - 3x4, 2x3 - 5in & 6in - in A & B position
- •ALL PARTS NEEDED TO ASSEMBLE HINGE ARE IN INCLUDED (HINGE, SCREWS, & CLASPS) DOWNSPOUT NOT INCLUDED
- •*****READ PRODUCT DESCRIPTION FOR QUANTITY DETAILS*****
Zip Hinge - 2 Pack | 2-6 Pack Set Downspout Gutter Hinge - Fits 2x3, 3x4, 5 inch, 6 inch - Universal Fit - Made in The USA
List Price: $37.83$34.05DEALYou Save: $3.78 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
Best solution I've found
appyface✓ Verified Purchase•October 24, 2017
Best solution I've found for gutter extensions.
These two-piece hinges were easy to install. Do go watch the video on their website, as the written instructions are not very clear. The video says all! The first downspout took me 30 minutes as I was very very cautious about the install and fit. After that, the next five downspouts were about five minutes each.
Aluminum downspout is recommended for extensions, but I used vinyl downspout and it worked fine, the included zip screws went through it easily. I cut the vinyl extensions with a hacksaw and miter box for 45 degree angle needed to attach. NOTE: Be sure you are cutting the 45 across the correct side! I wasn't paying that much attention and almost cut one left to right instead of top to bottom...
Another reviewer mentioned putting a bolt through the hinge holes once assembled and I agree, so I did that. The hinges will work without the bolt but as they are a bit flimsy, the long bolt through the holes really helps to stabilize the hinge joint.
I can't use the included butterfly hangers to hold the extensions in the upright position as my extensions are 6 feet, they go up to the top where the downspout bends toward the gutter. So instead I used two different methods.
Four of six downspouts are flush against the house. For these I used a long piece of 20 gauge 316 stainless steel wire, threaded between the downspout and house. I bent the ends into a U shape, and just hook the ends together around the extension to hold it up. It doesn't have to be tight, just snug enough to not unhook in a heavy wind.
The other two downspouts are not flush against the house but stand off a few inches. For these I used a long piece of "one-wrap" velcro strapping, I just wrap the extension to the downspout. (One-wrap is not sticky; it has hooks on one side and loops on the other so you can wrap it around itself no matter what length. Great for wrapping around cables and wires too.)
I would give the Zip Hinge 5 stars if it was sturdier. And if it had a good method for securing extensions up that are too long to use the included butterfly retainer.
These two-piece hinges were easy to install. Do go watch the video on their website, as the written instructions are not very clear. The video says all! The first downspout took me 30 minutes as I was very very cautious about the install and fit. After that, the next five downspouts were about five minutes each.
Aluminum downspout is recommended for extensions, but I used vinyl downspout and it worked fine, the included zip screws went through it easily. I cut the vinyl extensions with a hacksaw and miter box for 45 degree angle needed to attach. NOTE: Be sure you are cutting the 45 across the correct side! I wasn't paying that much attention and almost cut one left to right instead of top to bottom...
Another reviewer mentioned putting a bolt through the hinge holes once assembled and I agree, so I did that. The hinges will work without the bolt but as they are a bit flimsy, the long bolt through the holes really helps to stabilize the hinge joint.
I can't use the included butterfly hangers to hold the extensions in the upright position as my extensions are 6 feet, they go up to the top where the downspout bends toward the gutter. So instead I used two different methods.
Four of six downspouts are flush against the house. For these I used a long piece of 20 gauge 316 stainless steel wire, threaded between the downspout and house. I bent the ends into a U shape, and just hook the ends together around the extension to hold it up. It doesn't have to be tight, just snug enough to not unhook in a heavy wind.
The other two downspouts are not flush against the house but stand off a few inches. For these I used a long piece of "one-wrap" velcro strapping, I just wrap the extension to the downspout. (One-wrap is not sticky; it has hooks on one side and loops on the other so you can wrap it around itself no matter what length. Great for wrapping around cables and wires too.)
I would give the Zip Hinge 5 stars if it was sturdier. And if it had a good method for securing extensions up that are too long to use the included butterfly retainer.
Five Stars
Hussain Harun✓ Verified Purchase•September 30, 2017
These suckers are pricey but worth every penny!
Great
Amazon Customer✓ Verified Purchase•September 28, 2017
We got new gutters and these work perfect. Hubby said easy install. Great value.
Five Stars
W. Nelson✓ Verified Purchase•September 18, 2017
Fixes a nagging problem
Five Stars
William J. Bosse✓ Verified Purchase•September 10, 2017
Easy to install and simple to use.
Page 1 of 2
