The instructions were clear, and assembly was easy. I used this to mount a 50" Toshiba Fire TV to an interior wall in my master bedroom. The bracket comes apart into two pieces, one mounts to the back of the TV, the other mounts to the wall. Mounting to interior walls requires a drill, wrench (a ratcheting socket wrench is easiest), tape measure, and stud finder. A level will make things a little easier, but a tiny level is included with the bracket or you can McGyver a solution using a plumb-line. You MUST mount the bracket to a stud (the wooden beam behind the drywall); it cannot be mounted to drywall alone. You can mount the bracket to the TV and to the wall by yourself, but you will need a helper for a minute or two to do the final step of hanging the TV on the bracket and securing it with two screws.

Once mounted, built in adjustment screws made it easy to correct small errors in level and angle the TV down so it's easy to watch from bed.

This was about as easy as it could possibly be to assemble and mount. Once installed, the TV moves smoothly and easily. This is a great product and a tremendous value. Highly recommended!

We needed a mount for our RV that we could stow and latch. This fit the bill nicely. It came with comprehensive instructions. It also came with a well organized pile of hardware. They were all labeled by letters, and listed out in the manual. I used the included anchor screws to go into the studs of the wall. It also included a small level which came in handy in the confines of the RV. There are a few velcro type straps to secure any cables, also a nice inclusion.

My only complaint is the lock is rudimentary and the mount allows a bit of movement or wiggle. With a smaller TV it's probalby not an issue. Ours only weighs 16lbs IIRC, but it's wide enough any motion is amplified. We'll probably use some foam or pillows to pad it for highway travel.

I installed this tv mount and shelves today. It took less than an hour for both.
The instructions were simplicity itself.
I installed onto sheetrock and once I ascertained I had the exact center of a stud it was a breeze.
The use of a hanging clip for the TV was essential and so useful. Good design by someone who is an engineer. Thankfully I was able to use the TV mount plate without the extensions.

I read some poor reviews about this product but I found it to be exactly what the manufacturer said.
I cannot stress how easy this was to install.

Thank you so much

Just installed this mount MD2414-MX this past weekend. It's a great, solid mount and comes with all the mounting hardware that you will need for walls with wooden studs or concrete. I like the fact that they provide various options for mounting along with the necessary hardware to accomplish the task. It was plenty strong enough to mount my TCL 55" 4K TV (which is only about 30 pounds). I was impressed at how smooth the swivel and tilt action are on this unit. It's definitely a best buy. They sell a similar one at Costco that costs more than twice the price.

The instructions were very clear. The assembly was very simple. Insulation overall is very easy to handle. One comment is to ensure the Tilt forward bracket is tightened when you're putting your TV backup on the mount on the wall. This will keep the TV from slowly falling forward and potentially falling off. Also make sure you have a good stud finder so that you do not get too far to one side or the other of a 2x4 for installation.
The movement and swivel of the entire bracket is perfect and I absolutely love the security of this Mount directly into one stud vs. All across a 16 inch measurement for other brackets.
The only help I asked for was from my husband to help me put the TV on the bracket on when it was hung on the wall. I handled the installation from beginning to end by myself with that one exception. So as a woman, I recommend this bracket.