perfect fit for my little in wall legrand cabinet. Price wasn't too crazy. I am pleased with the purchase

Good quality product. Works very well. Only comment is that it didn't fit my OnQ board exactly. The dimensions were all correct, but the tabs that you insert first were just a tad too thick. They would go in their holes, but they would bind up when you tried to hinge the board down. I had to use some sandpaper and round off those two tabs a little. Not much. Took maybe 10 seconds.

I installed this in my daughter's new house. The builder installed an empty Legrand structured cabinet and pulled the wires (Cat5e and Coax) into it, but didn't terminate them. The installation of this interface module was was a bit tricky. It is awkward to install this module into the cabinet because the back of the cabinet is rather flimsy plastic. It took several minutes to get the pins lined up and snapped in, just right. Once that was done, punching down the wires was easy with a proper 110 punchdown tool.

The module is only color coded for the older 568A wiring standard instead of the more modern 568B standard. The builder elected to terminate a handfulsome of the wires with the 568A standard, so I had to terminate them to this module with the 568A standard. I terminated the remainder of the bare wires left dangling out of the drywall in the various rooms with the 568B standard. Therefore, I had to use the 568B standard when I terminated those wires into this module. As long as you use the same standard on both ends of the cable, it will work fine. You just have to watch what you are doing and test each termination with a cable tester when you are done.

Of course, the builder neglected to label any of the wires, so I had to trace each wire using a wire trace tool.

Bottom line, this is not always as easy as it looks and you must do your homework when using one of these. Honestly, I have never used Legrand products before, but I would not choose their line of products for any home I was building. In this case, I had no choice.

Great data module so far for my home network. Mounted easily in an an in wall residential network box and no issues terminating cables using a punch down tool. Devices are negotiating gigabit throughout using CAT6 cable. No complaints. Others have mentioned the stands may be fragile, I just think as long as you're not going crazy and forcing the thing to fit where it shouldn't it shouldn't be a problem at all.

As many have noted the color code uses the European standard so you have to swap the green and orange wires. Otherwise, worked great. I like that the CAT mounts from the front which is way easier than from the back. Doesn't look as clean, but once the box is closed no one knows.