Love these remote outlets!!! They are perfect for adding a little lighting across the room, in the hall and behind the tv and desk. Very versatile as to where you place your tall or table lamps, a fan, your additional garage or I ndoor patio lights and sound system or even holiday lights. I highly recommend this remote and set of three remote controlled outlets for super convenience for inconvenient outlets
(behind the couch, bed or desk, etc.)

This remote outlet switch works great in my garage for the overhead light. Before I had to walk across to the other side of the garage to turn on the garage lights. Now with the remote attached just outside the kitchen door, I can turn the lights on before even setting foot in the garage. The instructions say press the program button for 5 seconds until the red led flashes then press the on button on the remote and the led will stop flashing. On mine however the led continues to flash and won't stop even though the remote is programmed properly.

Omg!!!! I love it!!!, gonna buy more!!! These are perfect. I sit an forget to turn on my fan or turn it off... NOT ANYMORE! REMOTE CONTROL. THANKS. life is easier. Buying for xmas😀😀😀😀😀😀

Works fine. My bedroom light is very high up and I am unable to change the bulbs. I have a floor lamp which I plugged into the remote plug. I put the remote itself on the wall next to my light switch using velcro. This way, I will never lose the remote and I can just press the remote button just as I would the light switch when I enter the room.

I configured all outlets as described in product instructions with one remote controller. What I didn't know until later because the outlets were located in different rooms, was that other outlets were turning on and off along with the one I was looking at. I put all outlets in the same room and tried multiple times to configure them as required. Since all were in the same room, I was able to see that in some cases more than 1 outlet was turning on and off.

I used the second controller and was able to configure all 5 outlets without any problems. The first controller is defective so now I am trying to get in touch with Beastron. There is no phone number to call. The box does have a web address and I was able to send a note through the web site. If I don't get a response soon, I will simply return the whole package back to Amazon as defective.

Update 4-20-2018
I will not have to return the switches because I figured out the issue. Each remote controller is unique and each outlet has to be programed with both remotes. This can create a problem if buttons and outlets are mixed during the programming with each remote (my case). The reset function is not described in the 1 page instructions.

1. Unplug all outlets from the wall outlets.
2. Reset all outlets by holding down the program button while unplugged and continue holding down the program button while plugging it back into the wall outlet.
3. The light will blink fast 4 times and then stay off.
4. Do this to the next until all outlets have been reset.
5. Start with outlet [1]. Press the program button on the outlet until it starts to blink slowly.
6. Press button [1] on the 1st remote controller (not numbered) and the outlet will stop blinking. It is now programed.
7. Repeat step 4 and 5 to the remaining outlets using corresponding outlet and buttons (1=1, 2=2, 3=3, 4=4, 5=5).
8. Using the 2nd (not numbered) remote controller, repeat steps 4, 5, and 6 for all outlets.
9. 1st and 2nd remote controllers have now been programmed so that buttons and outlets match. (1=1, 2=2, 3=3, 4=4, and 5=5).