Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno

Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno
Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno

Key features

  • •✔ Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
  • •✔ Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
  • •✔ Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
  • •✔ Embedded TCP/UDP stack - allows you to upload data to a web server.
  • •✔ Industrial Temperature Range - -40°C to +85 °C
  • •GPRS multi-slot class 10/8
  • •GPRS mobile station class B
  • •Compliant to GSM phase 2/2+
  • •Class 4 (2 W @ 850 / 900 MHz)
  • •Class 1 (1 W @ 1800 / 1900MHz)
  • •RTC supported.
  • •Selectable serial port.
  • •Speaker and Headphone jacks
  • •Low power consumption - 1.5mA(sleep mode)
  • •M2M (Machine 2 Machine) Applicatoions
  • •Remote control of appliances
  • •Remote Weather station or a Wireless Sensor Network
  • •Vehicle Tracking System with a GPS module
  • •Make sure your SIM card is unlocked.
  • •The product is provided as is without an insulating enclosure. Please observe ESD precautions specially in dry (low humidity) weather.
  • •The factory default setting for the GPRS Shield UART is 19200 bps 8-N-1. (Can be changed using AT commands).
  • •Power select - select the power supply for GPRS shield(external power or 5v of arduino)
  • •Power jack - connected to external 4.8~5VDC power supply
  • •Antenna interface - connected to external antenna
  • •Serial port select - select either software serial port or hareware serial port to be connected to GPRS Shield
  • •Hardware Serial - D0/D1 of Arduino
  • •Software serial - D7/D8 of Arduino
  • •Status LED - tell whether the power of SIM900 is on
  • •Net light - tell the status about SIM900 linking to the net
  • •UART of SIM900 - UART pins breakout of SIM900
  • •Microphone - to answer the phone call
  • •Speaker - to answer the phone call
  • •GPIO,PWM and ADC of SIM900 - GPIO,PWM and ADC pins breakout of SIM900
  • •Power key - power up and down for SIM900
  • •1 x GSM GPRS SIM900 Shield

Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno

List Price: $38.76$34.88DEALYou Save: $3.88 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It October 25, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection

Related products