If not for the fan assembly issue I would have given this product 5 stars. I'm not including a pic of the issue because the company was that good about making things right. After installation I turned the fan on and it started making a loud clicking sound like it was hitting a screw or something. I noticed that the "squirrel cage" portion of the fan wobbled slightly as it spun, indicating a bent motor shaft. I also found that the plastic blower wheel was broken at the bottom, and the centrifugal force was causing the break to open up enough contact with the air outlet as it spun. I wrote to the company and they were awesome. We live in an imperfect world and things happen. The company really worked to make sure I was satisfied. They requested pictures of the issue and a statement specifying what I was requesting. I emailed 2 pics and a 2 second video clip to provide a clear understanding of what I was describing, and stated what I needed. They were very apologetic and promptly sent a new blower assembly; which thanks to their solid engineering I was able to replace in less than 5 minutes. Clips held it in place while I put in the three screws that mount it tightly; super easy and only two hands were needed, Yay! It has 2 plugs that can only plug into their correct sockets in their correct orientations, so there was not risk of me getting that wrong.

Pros:
- Super quiet, just as advertised.
- Moves a Lot of air, nothing "fogs-up" in that bathroom- The DewStop FS-300-W1 Humidity and Condensation Control on the R in the picture of our switch plate, manages the fan.
- Light temp is 2700K- Switch on the L in the picture of our switch plate works both the main light of the fan and the light above our sink. This is allowed per code in our state, but may not be elsewhere. I ALWAYS use a certified electrician for any electrical work, and ALWAYS recommend the same. The brightness in the first photo is deceptive because it's capturing light from both fixtures.

Cons:
- The night light is surprisingly bright- The 2nd photo from the L is the nightlight before dimming and the 3rd photo from the L, is the nightlight after dimming to max. It's hard to tell in these photos, but the night light is still a little bright, but their is a big difference between before and after dimming. The switch in the M in the picture of our switch plate is for the night light. You can see the slider at the bottom/lowest light level, so that is the light setting when the toggle switch is turned on/off.

This was for our master bath and leaving the Kaze night light on with the door open was not an option because the amount of light precluded sleeping (at least for me). To resolve this I replaced the toggle switch dedicated to only the nightlight, with a Lutron Ariadni/Toggler LED+ Dimmer | 150-Watt, Single-Pole/3-Way | AYCL-153P-WH, so I would not need to change my wall plate. I set the dimmer range to its lowest setting before putting on the wall plate so that the slider switch would dim the most. (it's easy and the instructions explain clearly how). With the slider at the lowest, the nightlight is still a little bright for my taste but this took its brightness way down. We leave the slider where it is and just use the toggle switch for on/off, and we are very happy.

Great product. Bright light and fan works well. Initially I had an issue with the light not working due to a faulty plug. But I contacted customer service and their response was I amazing! One e-mail and a new part was on its way to me within 5 minutes and arrived a couple days later. E-mails went back and forth and responses were timely and helpful u til the problem was resolved. Awesome job!

This fan works as promised...sort of. Everything is great except for a metal flapper that chatters some when the fan is on. It is too small a problem to replace but is irritating. (Like a couple of BBs in a tin can.)

One more HUGE THANK YOU to all the LIGHTEX Team!!We have a hostoric house where the wireing is more then complicated. Ad first i could not get the light (fan worked right away) to come on. Thanks to Lightex's tireless support I was able to get the light to work, due to their technical support! They modified and adaptor plate to adjust to our wiring in the house and had send it wihin one (!) day. The fantastic news really is that this fan/light combination works fantastic and we are very very happy! I'm certainly very impressed with this strong powerful fan and the nice design (see pictures). It makes our remodelIed bathroom stand out in a much more impressive and enjoyable way! I shared this with my neighbors as they start their projects as well -and I owe LIGZHTEX that they purchase their ceiling fans for their bathrooms from YOU!
All the very BEST until the very next time when i have a need to purchase a high quality part.
Wolf

So quiet it may be a problem if your trying to let one go and not be heard. Good craftsmanship.