DISH Network 1000.2 Slimline Western Arc Hybrid LNBF
Key features
- •Slim line Bracket #217610 (Not Included) required to use this LNB with a standard 1000.2 dish
- •Western Arc
- •DHP DPP and HD Compatible
DISH Network 1000.2 Slimline Western Arc Hybrid LNBF
List Price: $52.36$47.12DEALYou Save: $5.24 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 5 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Solved my intermittent switch errors
Cactus Jack✓ Verified Purchase•September 27, 2023
Used this to replace a Dish Pro head. Solved my lost port issues. Just remember to also order the proper plastic mount.
Just right for the job!
AT✓ Verified Purchase•September 5, 2023
Had a Dish 211K and a 1000.2 dish with DP LNBF. Needed to swap out the 211K with a (current account installed) Hopper3. This Slimline Hybrid LNBF with newly purchased Hybrid Yoke replacement was the cheapest and easiest route to go when replacing my system. I couldn't find any instructions on how to do this conversion, so I will share the swap over with others wanting to do the same.
My current system (before the swap) was a Dish 211K, Dish HD 1000.2 w/DP LNBF, and a single coax connection from receiver, with no others receivers attached. Installation went as follows: Unplug 211K receiver; replace current DP LNBF/Yoke with new Hybrid LNBF\Yoke (be sure to hookup coax to connector labeled "1" on new Hybrid LNBF); Swap and hookup Hooper 3; Turn on Hopper 3 and go through startup; Once done enter menu and go to Settings/Diagnostics/Dish/Test Installation (this will run a check switch and find your new Hybrid LNBF and reconnect the sats properly); Then go to settings/Diagnostics/Tools/Guide Update and run the update. My Hopper 3 now works great with just a receiver and LNBF/Yoke replacement.
My current system (before the swap) was a Dish 211K, Dish HD 1000.2 w/DP LNBF, and a single coax connection from receiver, with no others receivers attached. Installation went as follows: Unplug 211K receiver; replace current DP LNBF/Yoke with new Hybrid LNBF\Yoke (be sure to hookup coax to connector labeled "1" on new Hybrid LNBF); Swap and hookup Hooper 3; Turn on Hopper 3 and go through startup; Once done enter menu and go to Settings/Diagnostics/Dish/Test Installation (this will run a check switch and find your new Hybrid LNBF and reconnect the sats properly); Then go to settings/Diagnostics/Tools/Guide Update and run the update. My Hopper 3 now works great with just a receiver and LNBF/Yoke replacement.
Good as new
Roger A Pennington✓ Verified Purchase•August 19, 2023
Worked just like the original one and was easy to change
great
RON CORNWELL✓ Verified Purchase•July 22, 2023
great
AS ADVERTISED
JOHN ✓ Verified Purchase•June 9, 2023
EXACTLY AS DESCRIBED . ARRIVED ON TIME . WORKS PERFECT .
