Was looking at the farmhouse sinks for a bathroom remodel and was almost ready to order from a very expensive bath site. So happy I checked Amazon first! A third of the cost, and turned out just the way I wanted!

i really like this sink. i installed it as a wall mount in my 1914 farmhouse kitchen remodel. i went with this sink as the location i had to install is in a walkway, and i liked the shallow depth for my application. i will say other reviewers were right about having to be careful in your faucet selection and make sure the spout reach is not too long. i could not find a moen or delta faucet that worked well, but am happy with the kingston brass faucet with 8" spout. any longer spout and it will not flow properly into the sink basin and is not possible to rinse dishes.

overall i am very happy and my father (lifelong plumber) who helped install was impressed with the quality compared to cost. the sink is a great value, and the packaging was well protected also.

I finally finished my half bath renovation which centered around this sink, replacing a pedestal sink that wasn't deep enough for my needs. I am really pleased with this product! I didn't have the plumbing setup required, but was able to ultimately make it work with the "E-Z Install Wall Mount Faucet Water Line Kit", also found on amazon. I used rosette washers on both the front and back of the faucet holes in the sink to securely mount the faucet to it. I thought the instructions could have been much better and more comprehensive to help the DIY'ers out there. I probably made 10+ trips to Lowes and Ace Hardware before I landed on a configuration that worked for me. ðŸ'ƒ It was a bit of a painstaking process, but worth it in the end! It was also very difficult to find a faucet that didn't project out too far from the back wall to be usable for the size of the sink, but I ended up going with a Kingston Brass wall-mounted bar faucet and it works well enough. It would have been nice if the company had some compatible faucets to select from to help us out on that front. Overall though, this is a quality sink that is very attractive and will offer you the convenience of a nice large/deep basin in case you need to hand wash clothing or clean paint brushes and rollers!

The porcelain can easily be scratched when fitting a metal faucet and good luck getting many faucets to fit. I used an American standard wall mount faucetand had a terrible time finding fittings. Most of the fittings on Amazon are IPS fittings which they say if you wrap with tephlon tape will seal in an NPS thread .... I would not recommend as more often than not it will leak. So I went to a local plumbing store to buy some fittings which they had only to find out that the nipple coming off the back was not long enough to accommodate the thickness of a porcelain sink as most of these faucets are made for thin stainless steel commercial sinks. So I had to put a longer 2 inch nipple on the back which was too long ( 1 1/2inch nipple was too short) and make my own washers to get the faucet to fit snuggly .

This sink is really cute. Great quality and price too. ðŸ‘