Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs
Key features
- •Notice: We only provide after-sales service purchased from Seeed Studio
- •🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.
- •🌱【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
- •🌱【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support.
- •🌱【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
- •🌱【Multiple Software Support】Pico comes with corresponding C/C++ SDK, Micropython SDK resources.
Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs
List Price: $36.65$32.99DEALYou Save: $3.66 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Great little tool
Matt Bates✓ Verified Purchase•October 11, 2023
Been putting together a gaming room in my basement due to nostalgia, and so I bought the Pico so I could RGH3 mod a Jasper XBOX 360 and upgrade the internal drive to a 1TB SSD and load it full of multi-region games. With the PicoFlasher tool on Github and JRunner, I was able to communicate flawlessly between the XBOX 360 and Windows 11 and take all the NAND dumps I needed, then flash the custom firmware. I had no issues with detection, programming or flashing. The solder points on the Pi are awesome too, I have no worries at all about desoldering them and resoldering them for future projects. The pads held up perfectly. This method was 1/3 the price of using something like an XFlasher. Recommended product!
Works Perfect
Jonathan Hernandez✓ Verified Purchase•September 26, 2023
Got the board to do a PicoBoot mod for my Nintendo Gamecube and it works perfectly! I highly recommend this to anyone who wants a efficient mod
A Part Of A New IC Family
Angel A. Perez✓ Verified Purchase•September 18, 2023
I have experimented a little bit with a few Arduino micro-controllers including the micro-NANO and I got a little bit of a taste of the Tiney-Duino. Arduino likely must have laid the foundation for a new generation of ICs packaged in the traditional DIP mold but thanks to USB ports built into the ICs you no longer need to plug in a specific -5VDC input to program an EPROM or any classic microprocessor or for that matter connect a positive programming input of 12 to 25V ("Vpp") to one pin just to write data into. And finally The Raspberry Pi Foundation got its very own micro-controller IC lineup, the RPI-2040 family. The best part of it all is that you can program the micro-controller using any available language from Arduino (A++) to BASIC to C to Python.
Great product for motion sensor build for klipper
Adrian J.✓ Verified Purchase•August 19, 2023
I used this and another sensor to make a vibration sensor to reduce ringing on my 3D prints using the kipper firmware on my ender3 printer. Works great and easy to work with (assuming you are somewhat familiar with electronics)
Greatproduct
Bent T. Jensen✓ Verified Purchase•August 14, 2023
Came quickly with accessories,
Page 1 of 2
