Key features

• •Kit Includes: 1 X Oversized 18mm(Threads size) Raptor 700 Oil Filler Drain Plug Reducer with Magnet bolt tip ||| 1 X Tap 18X1.5mm (for making new Threads) ||| 1 X Thread locker. You will also need a drill bit of 16mm/16.5mm (NOT INCLUDED IN THIS KIT). The factory Crank case's drain plug thread size is 14mm.
• •Fitment: Fits Raptor 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Raptor 700 base. R AND SE
• •Also fits Raptor 660, Rhino 660 and 700 Fits Banshee 350
• •Installation Instructions: Tilt bike back on end and remove old drain plug. Apply good mount of grease on Drill bit of 16mm / 16.5mm thickness bit (Not provided with this kit) to catch metal shavings. Once drilled the crankcase, vacuum it properly so you will not left with shavings. Run the provided tap straight and carefully to make new threads. Clean the threads and vacuum again.
• •Use the Red loctite provided with kit on outer threads of Reducer. Tighten reducer to OEM specifications and then tighten drain bolt.(see pictures for the specifications) Let the loctite dry, install the bolt, fill the oil and repair is DONE!!