Slendor Magnetic Stirrer SH-2 Hot Plate Mixer Max 520℉ Lab Hotplate Stirrer 2000 RPM Stir Plate with Thermometer, Stir Bar and Support Stand
Key features
- •🔬 Adjustable Stirring Speed -- There is a speed regulating device at the bottom of the SH-2 magnetic stirrer hot plate. Rotate clockwise to increase the stirring speed, and counterclockwise to decrease. Adjust as needed. The max stirring speed is up to 2000RPM.
- •🔬 Rapid Heating -- Heating Power: 180W, Max Temp: 520°F. The magnetic hotplate stirre can stirrer and heat at the same time. Included 1 inch Teflon coated magnetic stirrer bar and thermometer, which can be used to display the temperature during use.
- •🔬 Advanced Material -- The magnetic stir plate is made of advanced materials, resistant to high temperature, abrasion, and chemical corrosion. Each stir hot plate stirrer has been tested and inspected, and the quality is guaranteed.
- •🔬 Widely Used -- The magnetic heated plate is suitable for scientific research institutions, industry, agriculture, laboratories and universities. Tips: work continuously for 4 hours in high-speed state and 8 hours in medium-speed state.
- •🔬 Quality Assurance -- The professional magnetic hotplate stirrer has undergone strict quality inspection and can operate stably for long time. If you have any questions about the lab hot plate, please contact the seller customer service at any time.
Slendor Magnetic Stirrer SH-2 Hot Plate Mixer Max 520℉ Lab Hotplate Stirrer 2000 RPM Stir Plate with Thermometer, Stir Bar and Support Stand
List Price: $94.99$85.49DEALYou Save: $9.50 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.2
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
Works perfect
Amazon Customer✓ Verified Purchase•July 15, 2023
I love it
Think it’s perfect
Super stud 77✓ Verified Purchase•July 11, 2023
I haven't used it to mix the oils yet ,but by the feel and quality of everything.I'm impressed.Also got hot super fast ,faster than expected..
Works as described no complaints
R Price✓ Verified Purchase•July 10, 2023
We are very happy with the product and it appears
Works great for my candle lab
Jonmichael✓ Verified Purchase•July 5, 2023
I need a heated mixer for some fragrance and wax experiments for my candle company. This one is simple and works great. I've been using it for several weeks, saving me so much time. It heats up quickly and holds the temperature well. I also love that it includes all the necessary components, like the stirring rod and stand.
Legendary Unit
Amazon Customer✓ Verified Purchase•July 1, 2023
Did I ever like this hot plate? No. I'm used to working on Corning units in professional labs that have chemical resistance, precise temp control, 550°C max temp, powerful incremental stirring, and LCD display.
This unit has none of these things, and is quite frustrating to use.
To start, the knobs mean basically nothing. The heating element is only slightly warm until you crank it to max at which point its ripping hot. The stirring is only slightly more incremental, and quite shockingly weak as hot plates go. It also developed an issue early on where I had to fiddle with the knobs for like 3 minutes to get it to actually start heating at all.
The hot plate surface has very minimal chemical resistance, and was permanently discolored by 2M HCl. It also happens to be designed in a way that's very difficult to clean/maintenance.
AND all 4 little rubber feet melted from the heat of the hot plate itself within a month.
Despite all that, this little unit lasted 7 whole months of very constant hobby use, which exceeded my initial expectations. It probably could have lasted longer but a beaker of boiling piranha solution spilled all over it.. which finally killed it for good.
That said, I became quite fond of this little thing over the months along with all its annoying quirks, and I admit I'll miss it. At the end of the day the low cost helps with the barrier of entry into hobby chemistry, and it always (eventually) got the job done. I highly recommend this unit if you want to get into hobby chemistry, but aren't sure how long the hobby is going to last.
This unit has none of these things, and is quite frustrating to use.
To start, the knobs mean basically nothing. The heating element is only slightly warm until you crank it to max at which point its ripping hot. The stirring is only slightly more incremental, and quite shockingly weak as hot plates go. It also developed an issue early on where I had to fiddle with the knobs for like 3 minutes to get it to actually start heating at all.
The hot plate surface has very minimal chemical resistance, and was permanently discolored by 2M HCl. It also happens to be designed in a way that's very difficult to clean/maintenance.
AND all 4 little rubber feet melted from the heat of the hot plate itself within a month.
Despite all that, this little unit lasted 7 whole months of very constant hobby use, which exceeded my initial expectations. It probably could have lasted longer but a beaker of boiling piranha solution spilled all over it.. which finally killed it for good.
That said, I became quite fond of this little thing over the months along with all its annoying quirks, and I admit I'll miss it. At the end of the day the low cost helps with the barrier of entry into hobby chemistry, and it always (eventually) got the job done. I highly recommend this unit if you want to get into hobby chemistry, but aren't sure how long the hobby is going to last.
Page 1 of 2
