Bye bye ugly electronic station in my kitchen. This thing is awesome - streamlined and just looks sleek. I can fit multiple devices and see pretty much zero cords.

I grew tired of cords sticking out everywhere and was looking for a simple solution and this fits the bill. The organizer itself is very sturdy. The one drawback are the pegs: They are very loose in the holes so when you remove a device pegs will fall out. I solved this with what I call ticky-tack. It's something I used when teaching to adhere posters to walls and labels to charts. If you look at the last photo I uploaded it shows a small amount of the ticky-tack on the bottom of a peg. This allows the peg to stick more firmly in the hole and not come out when I remove a device. So far it's been working without issue. It's a solution that doesn't damage the organizer and still allows me to change where the pegs if I want.

Otherwise, I have no complaints. The old power strip I had fit just fine inside the organizer with everything plugged in too. Currently, we use this organizer to hold an iPad, a kindle, an iPhone and a set of AirPods. It can definitely hold more than that.

I'm not typically one to write reviews, but this thing is great. We had a different charging station before, but if we put anything bigger than a Kindle fire on it, it would tip over.
With this one, we have a Chromebook, two iPads, two Kindle fires, and at least one phone on it and it's steady as a rock. Definitely recommend.

RE: Prosumer's Choice Natural Bamboo Charging Station Rack for Smartphones and Tablets / DARK BROWN

I love this thing and I was all ready to send it back if the reviews ended up being correct, but this is a great charging station holder.

I already have a "Unitek USB Charging Station for Multiple Devices, Charger Organizer Stand Dock with Dividers, Quick Charge 3.0 Compatible for Smartphone, Tablet, iPad and Other Electronics" that I put inside this (without the plastic dividers on that --needed a real solution like this wood one since the dividers on the Unitek are cheap crap that can't hold the weight of a tablet for long and constantly BREAK).

I also got a few packs of braided USB C (fast) to Lightning Cables (MFi Certified iPhone/iPads) to use with it. ***3ft long ones would be perfect for this*** but I got mainly 6ft ones just in case I wanted to use some elsewhere. The ones I had on the old charging station were 1ft, and while they worked with that just barely, they definitely don't fly when inside this thing and go up to the device, so something to keep in mind.

Since I keep this in the kitchen this "dark brown" one goes really well with out dark cherry wood cabinets, so it looks like it fits right in. You do notice dust right away, so if you don't have dark wood already you might want to get the light colored one.

I took another reviewers advice and used a rubber mallet to get the divider in, but then I realized I didn't really need it, you just have to push down harder than you'd expect but they do fit.

I was kind of shocked at how well packed it was, so maybe this is a new procedure since they other reviews? I agree though that the "Prosumer" branding should NOT be where it is so visible, but I turned it to a side it would be least seen (figure this out before you wedge the dividers in there). Also, there are open squares on each end of the base for the power cord to go out, but they diagonal from each other, so no matter which way you turn the base it never works out so the square hole is in the back if you want the cord going out to the outlet (viewing the unit wide side facing front, cord going out your left hand side).

If you are going to face it so the short side is toward you, instead of using all taller dividers, there is one really short one you can put in front so if you want to watch videos or look at a recipe on a tablet, you can put the tablet there. I used that shorter one there even though I use the stand wide side facing front, because I put my phone there normally, and if I want to do as mentioned previously I can just turn the unit that way while doing that. So I have an extra tall divider that I store inside the base with the charging unit (sold separately). There's also some velcro cord organizers and a couple pieces of flat velcro in there that came with this stand.

This is a great stand if you're like us and have several devices, a few of which have very heavy cases on them. This is a million times of an improvement from the plastic divider situation, but I would be reckless with it because it certainly could break, just not as easily as the plastic ones. This is the ONLY option I found like this (that also had the dark wood).

Definitely pay attention to the measurements and what you decide to put inside. This is just an empty box that you put either a electronic charging router type device with short wires to charge or something else. But it is absolutely perfect for making everything look neat and tidy. Easy assembly, literally 30 seconds! I bought the suggested box and wires and everything fit, but it was a little short on some of the wires trying to route it through the holes in the box. But it still works fine and everything looks great and it holds the iPads perfectly.