This is exactly what I wanted for a Tonneau cover. Fits perfectly, easy to adjust, instructions were clear and concise. Fits well to the bed and tailgate; just a better product than the tri-fold version I had on my last truck. Had a big rain storm move through after the install and the bed stayed dry. Listing says 2015-2020 but MFG website says will fit 2021, and it does!

Box was really beat up although there was no physical damage to the cover; when I fully inspected it there was missing one nut but I have tons of spare nuts and bolts I was quickly able to find a wingnut to replace the missing nut.

5/5 would recommend.
5/5 easy install
5/5 look on truck
5/5 fit and finished craftmanship
4/5 instructions clear (video on site and MFG site have old brackets for tension) 3/5 all parts in box when arrived (missing 1 nut) 1/5 packaging arriving without damage

This fits well on my 2014 Ford F-150 Super Crew with a 5.5' bed. The cover is petty easy to install if you follow the directions and watch a couple of videos on the installation process. One key thing you must do if you have plastic bed rail covers (I think all 2009-2014 F-150s have them) is remove the rubber seals on the sides of the rails that you mount the tonneau cover with. The instructions say to remove the "foam seals" but they are in fact rubber. You will not want to remove these when you look at them because they look like an integral part of the system, but if you leave them on the braces will not mount level and the cover will not fit correctly.

The kit will also come with 5-6 different pieces of weatherstripping that can leave you confused as to where they go since there is no mention of them in the instructions. What I did, and it worked well, was installed the thickest piece of weatherstripping (there is only one of this size) across the top front of the bed before you mount the braces. You can then use the other pieces of same thickness weatherstripping to seal the tailgate. This tailgate seal seemed a little weak to me so I went ahead and purchased this seal which works great: Ultimate Tailgate Seal . The instructions say to mount the cover as far forward on the bed as you can, but this will leave you with a gap where the tailgate and cover meet. When installing the braces you should close your tailgate and push the braces back just until the foam seals push up against the tailgate. This will ensure a better seal at the rear and the foam weatherstripping you installed in the front will weatherproof the front.

I really like this cover but think the seal where the cover meets the top of the tailgate is a weakness. The seal consists of a rubber flap that rests against the inside of the tailgate to fill the 1/2" gap but I am not convinced it would withstand heavy snow or rain. There are definitely some improvements that could be made to this cover, but overall, I think it is a quality product that will last for years to come. For the price, I don't think you can get a better tonneau cover. In fact, I like my Tonno Pro Lo-Roll better than my friend's much more expensive Truxedo cover.

Quite easy to install.Perfect fit.Quality cover at a good price.Would buy again.

Installation was easy, and so far no leaks at all. Biggest plus was the increase in fuel economy. On a 2,200 mile trip it more than paid for itself, as we got about 3 mpg better fuel economy. We are still getting over 2 mpg better just driving locally.

I don't write reviews very often, but I was extremely impressed by this product and the customer service.

THE COVER: This cover looks great, was easy to install and is very easy to use. I've used this cover extensively over the last 4 and a half years that I've owned it. In my opinion, this type of cover is much better than the hard multi-piece covers, since if you want put something in your truck bed that takes up the whole truck bed you can just roll it up. With the hard covers, you'll either block your rear window with it flipped up, or have to take it off and put it inside the truck cab if you need the space in your truck bed.

THE WARRANTY: Over the last 4 and half years that I've had this cover (with LOTS of use), I've never had any issues, but a couple weeks ago the velcro came off the right side of the cover, so that side wouldn't fully attach to the frame when rolled out. I didn't think it'd be covered by their warranty since it was so long ago that I purchased it, but read that it had a limited lifetime warranty, so I emailed the company a few pictures and explained what had occurred in the email. I generally don't have great luck with warranties, so I wasn't expecting much, but was pleasantly surprised at how quick I got a response AND the company said they'd replace it. After only a single day, they had responded to my request and setup to have a new one delivered. I couldn't believe it! I just got the replacement in today, and am excited to setup the new replacement cover. Thanks Tonno Pro!