Metpure Euro Reverse Osmosis Drinking Water Non Air Gap RO Faucet Filtration System Water Dispenser Spout (Brushed Nickel) with Drinking Water Faucet Wrench RO-FW148
Key features
- •High Quality Premium ceramic disc lever faucet crafted with solid brass exterior for durability and lasting finish
- •Include Free faucet wrench easy installation time by more than half and ensures tight mount
- •Include 1/4" Feed Tube hardware for non-airgap RO filtration systems. Need quick connect adapters or 3/8" tube conversions? Search for item B01HUD8Q7S or B01HUBVDI4.
- •Spigot Design 360 degree swing spout and single handle control
- •Non-airgap design only requires 1/2" hole for minimal countertop drilling and 3" shank for easy installation under sink. For installation video, go to https://youtu.be/m7NEkftR-sA
Metpure Euro Reverse Osmosis Drinking Water Non Air Gap RO Faucet Filtration System Water Dispenser Spout (Brushed Nickel) with Drinking Water Faucet Wrench RO-FW148
List Price: $57.60$51.84DEALYou Save: $5.76 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Easy install, looks great.
progrocker333✓ Verified Purchase•September 21, 2023
Bought to replace existing faucet that started leaking. Super easy install, the included wrench was very useful. Highly recommend.
Works
jeremy faling✓ Verified Purchase•August 17, 2023
Seems to work.better then stock faucet that was installed with our system.handle has fallen off
Pleasant Looking, Easy to Install
FloridaDan✓ Verified Purchase•June 1, 2023
Pleasant looking, easy to install, inexpensive.
When we replaced the RO faucet, decided to replace the filters, and clean, the RO system.
It took about 10 minutes to get the old faucet out and put the new one in. (Had no issues with rusted screws/nuts.)
It took another 3 hours to replace the filters and clean the RO system.
When we replaced the RO faucet, decided to replace the filters, and clean, the RO system.
It took about 10 minutes to get the old faucet out and put the new one in. (Had no issues with rusted screws/nuts.)
It took another 3 hours to replace the filters and clean the RO system.
Everything you need in a secondary faucet
Tom Hixson✓ Verified Purchase•May 31, 2023
Great diminutive secondary faucet (e.g filtered water). If your hole is at least 1" you can dump the clunky base (visible black gasket included). Fine finish, quality. Excellent flow (handle turns ccw). Included socket a sanity-saver.
Easy to install but watch the YouTube video instead of using box instructions
Hot Mama✓ Verified Purchase•May 28, 2023
This faucet was easy to install once I found the YouTube video showing what was needed and not needed and the correct order to line up the parts underneath the sink. The instructions on the box show two "black washers" but the video shows that the black washer isn't needed at all. The big beveled washer that goes first under the sink is white, not black. The hole predrilled in my sink was too big for the black washer anyway so I didn't use it on top. The set did not come with a black escutcheon plate as showed in the video either. The installation tool was a great addition to the kit as it made it very easy to install in such a tight space. I wish I would have remembered that was in the kit before I used a crescent wrench to remove the nut on the old faucet. I used the quick connect 1/4" fitting from my old RO faucet to connect the water line instead of cutting it and using the extra parts that came with the kit. So far the water pressure is lower than my previous one and it does leak for a second or two each time you turn off the water (as if it takes a few seconds for the handle to let the faucet know it should close), but for the price I paid it will work. It does look nice and shiny.
Edit: A few hours after install and plenty of use, the water pressure started looking normal and the water turns off immediately when I turn off the handle. The RO system must have needed some time to come back up to pressure and run air out of the line after the installation. I'm changing it from 4 stars up to 5.
Edit: A few hours after install and plenty of use, the water pressure started looking normal and the water turns off immediately when I turn off the handle. The RO system must have needed some time to come back up to pressure and run air out of the line after the installation. I'm changing it from 4 stars up to 5.
Page 1 of 2
