Good directions and easy to install. There are also videos online if you have problems. It's a nice clean looking fit. It rained the night after I installed it and very very little water got in. (See photo) However, I do have stake caps in the stake holes which I'm sure helped. No sagging from water accumulation. It appears the rain ran off as it should. It took me about an hour in the GA heat to install. Someone younger it probably takes 20-30 minutes.

Super easy install. I've never put on a bed cover, but I had it installed and locked down in less than 20 minutes by myself. Has held up well on the highway even when I'm going a bit over the speed limit (allegedly 95mph) or passing an 18 wheeler. I'm not seeing it leaking from the top, but the way the Ram 1500 is built, I still get water in the bed due to huge gaps in the tailgate sides. So if you're seeing water in your bed and you thought this would be a good 100% waterproof solution, then you are wrong. There are still gaps in other parts of your bed that will allow water in. All in all I would recommend this cover if you are looking for an affordable solution.

Based on the reviews, it seems they're combing different styles into one. I got the roll-up version. It fits and looks great on my 2021 Ram 1500 short-bed.

I was hesitant to buy based on my single experience owning a tonneau cover before (30 years ago!) which looked good, but was kind of a pain to use and had an annoying semi-fixed bar across the top of the tailgate. This one is MUCH improved and I'm happy with it.

There are a couple of small things that have me waffling between a 4 and 5-star review. One is price. It seems to fluctuate on this product. When I bought mine a week ago, it was sixty dollars less than it is today (who knows what it is when you are reading this.) Based on my price, I'd round up to 5 stars. Based on today's price, I'd round down to 4 stars.

Mine had one minor problem. One of the rails was missing an end cap so I had nothing to stick the foam pad to... but I found it in the bottom of the bow. The small screw was stripped, but since it was compressed against the back of the bed, it didn't really matter - it will stay on.

My other issue was with the installation directions. At first glance they looked great. I've had so many BAD installation guides recently, but this had big, clear drawings and used English that made sense... but... I was still confused. They are very bad at telling you which direction things go or which rail goes on which side, or if the little tension block goes in the front or the back. The drawings do a poor job of conveying WHERE it is you are working (rear/back/left/right). Does this white space represent the truck or the air? It's actually fairly intuitive, but I didn't want to mess anything up, so it took me over an hour to install it . If I had to do it again knowing how things are oriented, or if I had watched a video first, I could probably install it again in 15 minutes.

Yes, the rail with the lever goes on the driver's side at the tailgate end. The lever faces down.

Yes, the end of the rails with the two holes/slots goes at the cab-end of the bed, and yes, that second slot is where the tension bracket goes. It's a little snug, but the cotter pin slides through the hole in the bracket that (barely) extends through the rail. Stick the pin in horizontally.

Yes, the "head" (the crossbar with the rolled-up fabric) is oriented with the rubber flap facing the cab.

Yes, the rails are mounted on the SIDE of the bed rim, not on top, with the "hook" tape flush with the top and leaning in at a 45-degree angle.

Yes, it's a precise fit with the tailgate so make sure you position it with the gate closed. Once installed, tailgate WILL open and close without having to loosen or remove any part of the cover.

The fInished appearance is tight and professional. I was afraid it was going to take significant tugging and pulling to get it to fit well, but it did not. Just rolling it out and onto the hook-and-loop was nearly perfect. Just gave a light pull as I attached it and it was good to go. Very nice.

As long as the price is right, I definitely recommend this product.
4.5 stars

Hope this helps.

If you found my review helpful, please consider hitting the "thumbs up" button.

Not much for reviews but had to on this install was an absolute breeze, cover looks and works perfect well worth the money. haven't drove in the rain yet but i do think some areas may let water in a little but we will see

I generally was opposed to bed covers such as these, primarily because they limit what you can put in your bed, unless you spend a ridiculous amount f money on them. I bought this one because I needed secure bed storage for a road trip, which this worked out perfectly for. Although it isn't a hard tonneau cover, it does lock closed, needing to open the tailgate to reach the latch to open it. Installation was easy and during the trip, it proved to be almost weatherproof. After driving several hundred miles through a significant storm, only a little water made it through near the front of the bed. It is still installed on my truck, and when I need to haul anything taller than the cover, it easily rolls up and and allows full access to the bed.