Orion Motor Tech 50W CNC CO2 Laser Engraving Cutting Machine, 110V Laser Engraver Cutter Printer for Wood, Glass, Acrylic DIY with Auxiliary Rotary Device(12 x 20 Inches Engraving Area)
Key features
- •50W laser tube pre-installed. Large working area: 300 x 500mm. Machine dimensions: 24.8" x 25.6" x 40".
- •Suitable to work on wood, bamboo, plexiglas, crystal, leather, rubber, marble, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more non-metal materials. Engraving Speed: 0-500 mm/s. Cutting Speed: 0-80 mm/s.
- •Visible red dot pointer for better guidance. Higher resolution standard optics, no additional expensive lens packages needed. ⚠ ATTENTION: You have to leave your phone number when you order this item so that we can arrange the delivery for you !!! And please let us know if you need a lift gate service if you order this item !!
- •RDworks/Corelaser software (included) controls this laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing.
- •Air compressor directs a constant stream of air to remove heat and combustible gases from the work area.
Orion Motor Tech 50W CNC CO2 Laser Engraving Cutting Machine, 110V Laser Engraver Cutter Printer for Wood, Glass, Acrylic DIY with Auxiliary Rotary Device(12 x 20 Inches Engraving Area)
List Price: $2618.99$2357.09DEALYou Save: $261.90 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.9
out of 5
Based on 20 reviews
5★
60%
4★
40%
3★
0%
2★
0%
1★
0%
Plug and play for me.
Eddie Pacheco✓ Verified Purchase•October 16, 2023
This laser arrived almost a week earlier than expected. That was great! It takes way longer to remove it from the crate and onto a suitable stand than it does to get it up and running. So far I am very happy with it and have been using it via its LAN connection. It promptly interfaces with its included RDWorks software and with the license of Lightburn software that I purchased. I recommend using Lightburn software. So far so good with this machine. I'm happy with this purchase.
Real value outta the box!
Addicted to Prime✓ Verified Purchase•October 7, 2023
OK... let me start by saying I'm a maker so hacks, tinkering, and upgrades don't scare me. However, this laser cutter works right out of the box (a really big, heavy box) with little muss or fuss. My laser tube came fully connected and all I needed to do was hook up the water pump in a bucket of water and run some exhaust out of a window. I did upgrade to LightBurn and would recommend getting the bundle or getting LightBurn separately (it's incredibly easy and capable software). The laser was aligned and ready to start cutting. Here's where the tinkering comes in. I upgraded the blower to something a little beefier to move the smoke out more aggressively. I also added a honeycomb aluminum bed for cutting and added the "Ultimate Air Assist" to ramp up the air assist. You can do this easily with a compressor and a 24 volt solenoid air valve. These things are all nice upgrades but not needed to start cutting. This laser will easily cut through 3mm birch ply in one pass without needing to run at anything near 100% power. As with all things in big crates, your mileage may vary but I'm really pleased with what I've been able to create. You'll need a bit of space and a stand or a base near a place where you can vent the smoke.
Plug and play for me.
Eddie Pacheco✓ Verified Purchase•September 30, 2023
This laser arrived almost a week earlier than expected. That was great! It takes way longer to remove it from the crate and onto a suitable stand than it does to get it up and running. So far I am very happy with it and have been using it via its LAN connection. It promptly interfaces with its included RDWorks software and with the license of Lightburn software that I purchased. I recommend using Lightburn software. So far so good with this machine. I'm happy with this purchase.
Good value
Roll Tide CMB✓ Verified Purchase•September 30, 2023
This laser engraver is a good product for the money invested. Do your research and you wont be disappointed, its not perfect, it is made in China! It was pretty easy to put together and get it running. I use the LightBurn software for all my stuff. RD works is ok but i like the Lightburn interface better. Overall its been a good purchase.
Great machine for the price
R Musgrove✓ Verified Purchase•September 29, 2023
The machine has performed better than expected. I have been engraving names and doing glass etching and it has done a very good job. The software is adequate but could be better. Delivery was sooner than expected and setup was no problem thanks to some You Tube videos I had watched. Instructions are in broken English which makes them a little tough to understand, hence the videos.It's a good starter machine to learn on and I would buy it again.
Page 1 of 4
