Just what I needed for the upper side windows in my motorhome. Installation was easy: start by cleaning window thoroughly, cut film to size (err on the side of being a bit too big), apply solution to window and window side of film (the side that was toward the paper - I used an eyeglass lens cleaning solution), position film on window & slide for proper position/coverage, squeegee bubbles and solution out from behind film, allow to dry thoroughly, once fully dry use straight edge and *sharp* craft knife or razor blade to trim edges. Initially I tried to trim immediately after squeegeeing, but edges lifted easily and cuts looked jagged.

This is a great product and I am ordering enough to finish the other windows in my house. I will give a few lessons to make things easier and hopefully you won't have to experience the same lessons.

- Use a spray bottle of water with just a few drops of soap to wet the window prior to install. I have seen others recommend solutions but this is just as good. I will say if you think the window is wet enough, it's not. Go ahead and spray some more. With enough solution on the glass, you can slide and position where this is impossible if it's too dry.
- Cut the film a little on the large side. I added an 1/8" to each side to give a little leeway. You can go back and trim this after it's dry.
- Let the window dry overnight, and then go back and trim and push fully into the cornets of the windows. When it's still wet, it won't adhere all the way into the corners. If you come back and check the next day it won't be a problem.

All in all, it's highly recommended and I will definitely purchase again! I will say the installation kit is nice, but if you have the equipment to do it it's not mandatory. The small squeegee was very nice though!

The tint turned out great. Easy to apply had an issue with length and the company responded very quickly and replaced it for me now my house is tinted. It looks and feels great in here now. Great customer support experience. Thank you

I have an "arch" on top of one bedroom window and recently put a TV in the room. Too much light was coming in so I tried this as a test to see if I wanted to permanently darken the window. I liked that it's temporary and can be easily removed. I used the white paper inside box to cut a template and then cut to fit. The static cling works great if you spray the window with water as you're applying covering.

This film works great but you must clean off your windows and the surrounding area well before attaching them to your windows. I have cats and despite my best efforts a few stray furs got under the film while I was applying it to the windows. If there is anything underneath the film during application it will leave a bubble. I've used this film for the last two seasons and it works well but it is time consuming, messy, and somewhat difficult to place on the glass cleanly.