I have a 2016 Sierra with several additions including an auxiliary battery, winch, front and rear LED lights, and an air horn. Hey, I'm from Alabama what did you expect? I quickly ran out of space for switches on the dash, and did not want to cut any holes in it either. There was also a large number of extra wiring harnesses, inline fuses, and relays. I decided to install a switch panel that integrates everything in one panel. I needed one that can change colors to match my red dash lights, dim, and also have the ability to make the switches momentary, you know, for my air horn! There were a ton of different kits out there, but this was the only one that offered all of the features I was looking for. It also included a pre-populated waterproof enclosure that came with relays and fuses.
The kit came very well packaged and with all necessary installation items. I was able to mount the panel to the same spot I previously had my switches installed. When you install the unit, just take your time and pay attention to the directions. I used wire loom and created a new harness for the wiring from my accessories to try and keeps installation as clean as possible. When done, I had eliminated a big wad of wires from under the hood and have only a single control cable going into the cab which is not visible. When you look at the pics of under the hood, the red wire that is rolled up is the remote turn on wire that hooks to a circuit that is on when the ignition is on. I currently have it installed using the power switch on the panel to turn it on and off. I ran out of time to run that last wire and will address that in the future. The relay box has a set of dip switches that enable either manual on/off or on with accessory power. Either way, the unit can be turned off with the power switch on the control panel and will remain off until turned on via the switch. I hope this review helps.

Update,
6 months of use so far and everything works great. However the control panel is starting to delaminate a bit.

I installed this on a 2018 Toyota 4Runner to run a light bar, ditch lights and rear flood lights. It was super easy to install, looks clean and makes adding off-road lighting and accessories much easier. Only one wire needs to go through the firewall into the cab and you can control up to 8 accessories. I mounted it to my relay/fuse box under the hood and attached the trigger wire/add a fuse under the dash. Works wonderfully, and the timing from pressing you on button to the lights activating is great. Multiple background color choices and tons of stickers for whatever accessories you're adding. It came with everything I needed to install and multiple ways to mount the switch. The only thing I'd like to see added to the package is a Blue Sea Bus bar to ground all of the negative wires too. But I have one on the way, and I'll definitely be recommending this product to other Overlander's and off road lighting users.
Thanks Voswitch for making a complete and well priced product to meet and exceed my needs.

There is NO REASON to spend over $1k on a switch control (that is just plain stupid). However, you also do not want to trust the power distribution of your high end off road rig to a cheap knock off (fires happen often due to bad vehicle wiring components). There is a certain brand that many are buying and I just wonder how many shorts / fires will happen. In addition, who thinks solid-state relays are a good idea? if the board goes, you have to throw away the entire system and start over. Relays go bad and are dirt cheap to replace. I wanted a simple switch controller with "REAL" realys and Voswtich had it all. Great quality fit and finish and real relays. This is a great system!

Product works well. I have had it for over a year trouble free I did have a glitch but talking to Victor he saw that right away and it was something I did. Victor is really good he replies quickly I had a problem with the motherboard and he had one sent to me very quickly I highly recommend the product and the person behind it! As good as or equal to Switch pro.

I installed this on my 2018 Ram 2500 - I am a fan of the cost savings from the Switchpros, but wish a few things were different.

The locking mechanism for the fuse box is iffy. It probably wont open, but it feels cheaply made. When I turn on one pair of lights, then go to turn on another at the same time, it cuts out one of the lights, then it turns back on. Why? No idea. I've tried everything and can only blame the fuse box at this point.

I really do like the panel itself. Quality is high, the functions/programmable settings are outstanding, and it doesn't get too hot. Overall, I would give this a 4/5 and definitely recommend to a friend if they want to save some money! Don't forget to buy a negative busbar!