PGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank & 6.5 Ft Cable, Compatible with Mach3 (Edge Finder-NO)
Key features
- •The 3 coordinate XYZ axis touch probe can achieve fast centering, edge finding, center finding, flatness acquisition, shape measurement and other functions by connecting the control panel (mach3, grbl), which perfectly solves the problem of positioning the parts during the 2nd tightening.
- •Main Specs: power: DC5-24V, NPN-NO wiring, repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in,
- •Material: fine frosted black oxidized aluminum alloy with a flat surface anti-roll design, protect the digitizing touch probe from dropping.
- •Compatible with: Mach3 and GRBL control system.
- •Package Include: 3D touch probe x 1, cable x 2 m/ 6.5 ft, allen wrench x 1, straight probe tip x 1, 1 in 2 out wire connector x 2 (to solve the insufficient problem of control board wiring ports).
BrandPGFUN
CategoryMulti Testers
PGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank & 6.5 Ft Cable, Compatible with Mach3 (Edge Finder-NO)
List Price: $105.91$95.32DEALYou Save: $10.59 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.8
out of 5
Based on 6 reviews
5★
83%
4★
17%
3★
0%
2★
0%
1★
0%
Im impressed!
ernesto guevara✓ Verified Purchase•October 9, 2023
This exceeded my expectations. Ive boughten some other ones in the past. This is very well machined. Works very well for the precision i need. It has 4 set screws that let you adjust the concentricity unlike other cheaper ones.
I would definitely recommend this seller and this product. We'll just see if it stands the test of time now.
I would definitely recommend this seller and this product. We'll just see if it stands the test of time now.
Not great not bad
David J Friedeck✓ Verified Purchase•September 29, 2023
Not as repeatable as I had hoped for. Z axis not really usable.
You are just as accurate as the tools you have
Jono✓ Verified Purchase•September 26, 2023
Needed if you are serious about cnc, if you are not serious and still using a cnc you will still need this.
Works well. Good value.
KIMBERLY L KISER✓ Verified Purchase•August 8, 2023
So far so good. Accuracy and repeatability is good enough for the hobby machine that I'm using this on.
With minimal changes to Universal G Code Sender it works
doc✓ Verified Purchase•July 8, 2023
Don't throw out the paper receipt as its the instructions telling you what color wire is which. Note requires a 5v to 24v power source for the red cable, Black is Ground and Yellow is Signal. Same setup as any powered proximity switch you have to source at least a 5 volt power source for the red cable. Those people that righteously say its a three pin plug (Note you do have to provide your own) without offering jumpering it to a 5 volt pin are not helpful. Very good value as unlike an Aluminum touch plate this is insulated from the machine so if like me you have an aluminum bed this will still be able to align your machine. They also threw in a freebie which I used to test the wires a little wire clamp kit.
Page 1 of 2
