B&K Precision 2704C Manual Ranging Tool Kit Digital Multimeter with Transistor Test
Key features
- •Manual-ranging digital multimeter measures voltage, current, and capacitance, and performs diode, continuity, logic, and transistor common-emitter gain (hFE) tests
- •Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
- •Magnetic hanger and built-in stand free hands for managing test leads
- •Hold function keeps a reading on the display, even after the meter is disconnected
- •Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Pollution Degree 2 for indoor use
- •B&K Precision 2704C digital multimeter
- •Set of test leads
- •Spare fuse
- •9V battery
- •Instructions
B&K Precision 2704C Manual Ranging Tool Kit Digital Multimeter with Transistor Test
List Price: $125.70$113.13DEALYou Save: $12.57 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (4)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.1
out of 5
Based on 10 reviews
5★
50%
4★
20%
3★
10%
2★
0%
1★
20%
I'm really happy with the condition of the meter
Mitchell Strong✓ Verified Purchase•August 27, 2017
I'm really happy with the condition of the meter, however, the package was missing 3 parts.
1) Was the 9 volt battery. Not a big deal, except the fact that at the bottom of product description it has a "What's in the Box" section and it states a 9 volt battery is in the Box.
2) The strap on the back was missing, which is partially the reason I got this model.
3) The extra fuse.
Nowhere on the ad did it say it was missing parts. Pretty disappointed.
1) Was the 9 volt battery. Not a big deal, except the fact that at the bottom of product description it has a "What's in the Box" section and it states a 9 volt battery is in the Box.
2) The strap on the back was missing, which is partially the reason I got this model.
3) The extra fuse.
Nowhere on the ad did it say it was missing parts. Pretty disappointed.
Nice Quality Multimeter
Enginerd✓ Verified Purchase•December 1, 2015
Nice looking well built meter. Selector switch has nice feel. I use it with the stand so it's on my work bench most of the time. It also has a magnet on a strap attached to the stand and I've used it a few times and found it handy to hang against the wall when my bench gets too cluttered. Leads that came with it are good but I use a set I bought on Amazon that has changeable tips(Extech TL809 Electronic Test Lead Kit). I mainly use mine with hook clips that allow hands free use. Gets used a lot and no problems.
I think It gets home with a bad fuse because it was not reading resistance nor amperes
Carlos G. Mercado✓ Verified Purchase•March 1, 2015
I think It gets home with a bad fuse because it was not reading resistance nor amperes. I look in youtube on how to know if a fuse is bad and it should read resistance like 1 ohm. I change the fuse (be careful because you need to spin the battery holder so there is a longer wire and lets you change the fuse) and when I change it I test the old fuse and it resulted on a reading of 1 meaning it was bad. The good thing is that the box came with an extra fuse. I bought it because there are similars on a lab and I liked this kind of manual multimeter from this company. Easy to use.
My favorite multi-meter ever.
MsDelilah✓ Verified Purchase•January 30, 2015
This meter is perfect for my needs. I build guitars, pedals and amplifiers, so I deal with both very low voltage/amperage and very high voltage/amperage. This meter does everything I need, is super accurate and durable. If this was lost or stolen, I would buy the same one agina immediately.
Can't find replacement fuses.
K. Ray✓ Verified Purchase•October 2, 2014
It works well, but I have blown a fuse and cannot readily find replacements. No one has the exact size which the manual says to replace with "original type." Fuse 1 is 500ma/500V 6.35x32mm and fuse 2 is 10A/600V 6.35x25.4mm. If you get this multimeter don't blow a fuse and you'll be fine.
Page 1 of 2
